Gun-cotton may be taken as an example of a chemical compound. The woody or fibrous part of plants is called “cellulose.” Its chemical formula is C₆H₁₀O₅, that is, the molecule of cellulose consists of six atoms of carbon in combination with ten atoms of hydrogen and five atoms of oxygen. If this substance be dipped into concentrated nitric acid, some of the hydrogen is displaced and peroxide of nitrogen is substituted for it. The product is nitro-cellulose, the formula of which is C₆H₇(NO₂)₃O₅. If this formula be compared with the last, it will be seen that three atoms of hydrogen have been eliminated and their place taken by three molecules of the peroxide of nitrogen NO₂; so that we now have a compound molecule, which is naturally unstable. The molecules of the peroxide of nitrogen are introduced into the molecule of cellulose for the purpose of supplying the oxygen needed for the combustion of the carbon and the hydrogen, just as the groups of molecules of saltpetre were introduced into the charcoal of the gunpowder for the combustion of the carbon and the hydrogen of that substance. Only, in the former case, the molecules of the peroxide are in chemical combination, not merely mixed by mechanical means as in the latter. The compound molecule of nitro-cellulose may be written C₆H₇N₃O₁₁, that is, in 297 lb. of the substance, there are (6 × 12) 72 lb. of carbon, (7 × 1) 7 lb. of hydrogen, (3 × 14) 42 lb. of nitrogen, and (11 × 16) 176 lb. of oxygen; or 24·2 per cent. carbon, 2·3 per cent. hydrogen, 14·1 per cent. nitrogen, and 59·4 per cent. oxygen. When the molecule is broken up by the action of heat, the oxygen combines with the carbon and the hydrogen, and sets the nitrogen free. But it will be observed that the quantity of oxygen present is insufficient to completely oxidize the carbon and the hydrogen. This defect, though it does not much affect the volume of gas generated, renders the heat developed, as shown in a former section, considerably less than it would be were the combustion complete, and gives rise to the noxious gas carbonic oxide.

Cotton is one of the purest forms of cellulose, and, as it may be obtained at a cheap rate, it has been adopted for the manufacture of explosives. This variety of nitro-cellulose is known as “gun-cotton.” The raw cotton made use of is waste from the cotton mills, which waste, after being used for cleaning the machinery, is swept from the floors and sent to the bleachers to be cleaned. This is done by boiling in strong alkali and lime. After being picked over by hand to remove all foreign substances, it is torn to pieces in a “teasing” machine, cut up into short lengths, and dried in an atmosphere of 190° F. It is then dipped into a mixture of one part of strong nitric acid and three parts of strong sulphuric acid. The use of the sulphuric acid is, first, to abstract water from the nitric acid, and so to make it stronger; and, second, to take up the water which is formed during the reaction. After the dipping, it is placed in earthenware pots to digest for twenty-four hours, in order to ensure the conversion of the whole of the cotton into gun-cotton. To remove the acid, the gun-cotton is passed through a centrifugal machine, and subsequently washed and boiled. It is then pulped, and again washed with water containing ammonia to neutralize any remaining trace of acid. When rendered perfectly pure, it is compressed into discs and slabs of convenient dimensions for use.

Rock Blasting — Part 41