A suction excavator or vacuum excavator is a construction vehicle that removes heavy debris or other materials from a hole on land.

Description

Suction excavation utilizes high-powered fans to safely excavate up to of depth depending on the configuration. First, a small surface area hole of about is created. Then, the suction excavator hose removes materials below the surface. Compressed air is used to fracture the ground for the suction excavator to remove the material safely. No manual hand tooling is used in the process.

Suction excavator

History of fan-based suction technology

RSP has been making suction excavators and stationary suction units since 1993. Since 2000, RSP developed a new suction principle, the ESE series. These vehicles work with the internationally patented suction principle which guarantees the highest degree of gravity separation, lowest contamination of the filters, and thus consistently high suction performance.

Suction excavator

Since 1998, the Mobile Tiefbau Saugsysteme has produced another type of suction excavator. It is said to have a newly designed air flow principle, and thus a considerably improved suction performance compared to MTS's previous designs.

Suction excavator

Design and operation

RSP

Since 1993 RSP have produced suction superstructures mounted onto two, three and four-axle vehicles, stationary suction units as well as custom-made machines.

The suction unit is roughly rectangular-block-shaped, about 2.5 meters wide and 3.6 meters high, and is usually mounted and used on the back of a truck, which must have power takeoffs to run the suction unit's air impeller and hydraulics. When it is emptying its load, the spoil tank lid (with the hose connection) hinges off to the right, and then the spoil tank (with the filters) tips about 90° over to the left to tip out its load.

Possible applications include:

Replacement of pipes and fittings

Renovation and new installation of gas, water or heating pipes, cables, and sewage lines Exploratory excavations Railway trackside maintenance and repair Use of ground displacement rockets Clearing away environmental damage Replacement of contaminated soil around the roots of trees Removal of material in demolition projects Removal of gravel from flat roofs Cleaning blocked street gutters and gullies Operations involving the use of horizontal boring units Leaf removal Application for special operations

Suction excavators eliminate the need for costly and time-consuming manual labour. Buried pipe systems do not suffer damage. The output is up to sixteen times that achieved by conventional excavation.

In the ESE 32/7: The suction pipe's internal diameter is The fan produces a maximum pressure reduction of about . Across a circular suction diameter of that gives an entry air speed of about and a maximum suction power of about . It can suck objects up to across that weigh up to . Described as able to suck up "earth, stones, vegetable waste, sand, mud, water, pebbles, rubble, asbestos, railway-type ballast". The suction pipe has a detachable extension nozzle narrowing from internal diameter, with handles on a rotatable panel to open or close side vents to let the operator drop over-large objects that it has picked up. Expected spoil extraction rates are rough, in cubic metres per hour:

Mobile Tiefbau Saugsysteme

Mobile Tiefbau Saugsysteme (MTS) in Germersheim (Germany) has produced the following suction excavators since 1998:

With the Mega-Vac the suction power across a wide hose entry would be about 500 kg.

Saugmaster

Saugmaster is a RSP ESE model; it can suck 8 m3/s of air, and its suction tube is wide inside.

History of vacuum-pump-based suction technology

Pacific Tek

Pacific Tek was founded in 1993 and went into the valve exerciser and vacuum excavator industry. Pacific Tek founders have created innovations, such as the Angled Vacuum Excavator Tank (1997) and 180° Swivel Mount Valve Operator (1999).

Ditch Witch

The American firm Ditch Witch makes four models of suction excavators: FX20, FX25, HX30, HX50, FX50, FXT50, FX65, FXT65, and HX65; the number is its approximate horsepower. It is mounted on a semitrailer or rigid truck. It has its own engine (petrol for FX20 & FX25, the others diesel). Its spoils tank is cylindrical with somewhat rounded ends. Its suction hose is 3 to 4 inches diameter inside. Its spoil tank can be various sizes from 150 gallons (570 litres) to (4560 litres.)