If it is desired to store the arms, or protect them for long periods of time, the interior surfaces of the frame, and all the mechanism, should be carefully cleaned and oiled, and then the entire space within the frame filled solid with non-liquid grease, like the Winchester "gun grease." After cleaning the barrel and cylinder, the bore and chambers in the cylinder should be filled solid with the grease. This treatment excludes the air, and absolutely prevents oxidation. The exterior should be oiled, and then coated heavily with "gun grease." Place the arm in a dry woollen cloth, or flannel cover, and wrap it up in a double thickness of new manila paper of the weight of ordinary writing paper. Repeat this, wrapping twice more, each wrapping independent of the other. Then lay the arm in a dry place, where the temperature will always be uniform, and not so warm as to melt the grease. An arm protected in this way will remain in good condition for a period of two years.

Another method of protecting weapons from rust is to immerse them in oil. The wood or rubber stocks should be removed and the arms suspended from a rack in a large glass jar with a ground glass cover to prevent the evaporation of the oil. This is a very quick and effective method and is much more convenient than the preceding plan. The best quality of refined sperm oil should be used.

Pistol and Revolver Shooting — Part 60

The factory-loaded ammunition for pistols is so excellent that little is to be gained by hand loading. It is sometimes desirable, however, to use special loads that are not furnished by the factories, and such ammunition must be loaded by hand. Then, too, many persons prefer to reload ammunition for economical reasons. In order to do this successfully, considerable experience and skill are necessary. The first attempts at reloading are invariably unsatisfactory and disappointing, and sometimes result disastrously. Extreme care and close attention to details are absolutely essential, especially if smokeless powders are used. It is much the safest and best plan for those who are unfamiliar with reloading to observe and study the methods used by skilled persons, and, if possible, have their first work supervised by an experienced person.

Pistol and Revolver Shooting — Part 60