In physics, thermal contact conductance is the study of heat conduction between solid or liquid bodies in thermal contact. The thermal contact conductance coefficient, , is a property indicating the thermal conductivity, or ability to conduct heat, between two bodies in contact. The inverse of this property is termed thermal contact resistance.

Definition

When two solid bodies come in contact, such as A and B in Figure 1, heat flows from the hotter body to the colder body. From experience, the temperature profile along the two bodies varies, approximately, as shown in the figure. A temperature drop is observed at the interface between the two surfaces in contact. This phenomenon is said to be a result of a thermal contact resistance existing between the contacting surfaces. Thermal contact resistance is defined as the ratio between this temperature drop and the average heat flow across the interface.

Thermal contact conductance

According to Fourier's law, the heat flow between the bodies is found by the relation:

Thermal contact conductance

where is the heat flow, is the thermal conductivity, is the cross sectional area and is the temperature gradient in the direction of flow.

Thermal contact conductance

From considerations of energy conservation, the heat flow between the two bodies in contact, bodies A and B, is found as:

One may observe that the heat flow is directly related to the thermal conductivities of the bodies in contact, and , the contact area , and the thermal contact resistance, , which, as previously noted, is the inverse of the thermal conductance coefficient, .

Importance

Most experimentally determined values of the thermal contact resistance fall between 0.000005 and 0.0005 m2 K/W (the corresponding range of thermal contact conductance is 200,000 to 2000 W/m2 K). To know whether the thermal contact resistance is significant or not, magnitudes of the thermal resistances of the layers are compared with typical values of thermal contact resistance. Thermal contact resistance is significant and may dominate for good heat conductors such as metals but can be neglected for poor heat conductors such as insulators. Thermal contact conductance is an important factor in a variety of applications, largely because many physical systems contain a mechanical combination of two materials. Some of the fields where contact conductance is of importance are: Electronics Electronic packaging Heat sinks Brackets Industry Nuclear reactor cooling Gas turbine cooling Internal combustion engines Heat exchangers Thermal insulation Press hardening of automotive steels Flight Hypersonic flight vehicles Thermal supervision for space vehicles Residential/building science Performance of building envelopes

Factors influencing contact conductance

Thermal contact conductance is a complicated phenomenon, influenced by many factors. Experience shows that the most important ones are as follows:

Contact pressure

For thermal transport between two contacting bodies, such as particles in a granular medium, the contact pressure is the factor of most influence on overall contact conductance. As contact pressure grows, true contact area increases and contact conductance grows (contact resistance becomes smaller).

Since the contact pressure is the most important factor, most studies, correlations and mathematical models for measurement of contact conductance are done as a function of this factor.

The thermal contact resistance of certain sandwich kinds of materials that are manufactured by rolling under high temperatures may sometimes be ignored because the decrease in thermal conductivity between them is negligible.

Interstitial materials

No truly smooth surfaces really exist, and surface imperfections are visible under a microscope. As a result, when two bodies are pressed together, contact is only performed in a finite number of points, separated by relatively large gaps, as can be shown in Fig. 2. Since the actual contact area is reduced, another resistance for heat flow exists. The gases/fluids filling these gaps may largely influence the total heat flow across the interface. The thermal conductivity of the interstitial material and its pressure, examined through reference to the Knudsen number, are the two properties governing its influence on contact conductance, and thermal transport in heterogeneous materials in general.

In the absence of interstitial materials, as in a vacuum, the contact resistance will be much larger, since flow through the intimate contact points is dominant.