A still video camera (SVC) is a type of electronic camera that takes still images and stores them as single frames of video. They peaked in popularity in the late 1980s and can be seen as the predecessor to the digital camera. However, unlike the latter, the image storage in such cameras is based on analog technology, rather than as a digital file.

Design

The most common design has an image sensor and basic processing hardware similar to that of a consumer camcorder designed for analog television using the appropriate regional format (NTSC, PAL, or SECAM). However, instead of storing consecutive interlaced fields on tape to form a moving image, a single field or frame (combined from two fields) is extracted from the output video signal and saved on a rotating magnetic disk, typically a standard Video Floppy. During playback, the disk is spun at the frame rate of the video system with the field or frame being read repeatedly. This produces a conventional analog video signal that can be viewed on a normal television.

Still video camera

The resolution is limited by the device's playback system, which is equivalent to pausing a single field or frame from a video recorder. Since the image is stored as a conventional analog video field or frame, the resolution is limited to the regional SDTV format; in addition, since the images are not stored digitally, transferring the images to a computer requires a video capture card.

Still video camera

History

Development and prototyping

Canon began developing a still video system as early as 1977 following a secret presentation from Texas Instruments (TI). Processing the image data from a CCD sensor into a digital file would have required a supercomputer at the time, so a strategic decision was made to use analog recording methods, and Canon recruited Sony and other manufacturers to create a standard format, resulting in the Video Floppy. Other members included JVC, Matsushita (Panasonic), Olympus, Philips, and RCA.

Still video camera

The first still video camera was a prototype Mavica (a portmanteau of magnetic video camera), which was unveiled by Sony chair Akio Morita on August 24, 1981. The prototype Mavica was equipped with an interchangeable lens and was approximately the size and weight of a conventional 35mm SLR camera at and . It offered shutter speeds ranging from to sec; the video floppy (branded "Mavipak" by Sony) was capable of storing up to 50 images. The Mavica was equipped with a single CCD sensor with a basic resolution of 570×490, but resolution was limited to approximately 350 horizontal lines. This was because it was designed for video playback, which is composed of interlaced video fields of approximately 240–280 horizontal lines; the Mavica's resolution was slightly boosted by recording color information on a separate FM channel, instead of as a subcarrier to the analog signal. At the time, Sony stated it would be 15 to 24 months before the Mavica would be marketed, at an estimated cost of for the camera and an additional for the playback unit.

Film manufacturer responses

At the time, both Polaroid Corporation and Eastman Kodak were rumored to have developed competing still cameras similarly using image sensors instead of film. Polaroid offered no comment regarding Sony's Mavica, but previously had published a patent describing a camera that stored images electronically by 1980. Kodak published its position in an internal employee newsletter: "Technical capability does not necessarily mean mass-market capability. For any number of reasons—including costs, convenience, quality, and size among others—electronic systems don't meet the needs and expectations of the amateur still-picture-taker." Kodak was developing its own CCD sensors and prototype digital file-recording cameras, including both the Lloyd/Sasson 1975 digital camera and the 1988 1-megapixel monochrome "Electro-Optic Camera" for a U.S. Government client.