Short Inscriptions,such as those usually on Tombstones or Foundation Stones, may well be arranged in the "_Symmetrical_" way, but long Inscriptions are better arranged in the "_Massed_" way, though, sometimes, the two methods may be combined in the same Inscription.

_The Roman Alphabet_, the alphabet chiefly in use to-day, reached its highest development in Inscriptions incised in stone (see Plate I.), and it became absolutely suited to the material.

Writing & Illuminating, & Lettering — Part 157

Besides ROMAN CAPITALS, it is necessary that the letter-cutter should know how to carve Roman small-letters[119] (or "Lower case") and _Italics_, either of which may be more suitable than Capitals for some Inscriptions.

Writing & Illuminating, & Lettering — Part 157

Where great magnificence combined with great legibility[120] is required, use large Roman Capitals, [p391] Incised or in Relief, with plenty of space between the letters and the lines.

Writing & Illuminating, & Lettering — Part 157

Where great legibility but less magnificence is required, use "Roman Small-Letters" or "Italics," or Roman Capitals, either small, or close together, or both.

All three Alphabets may be used together, as, for instance, on a Tombstone, one might carve the Name in Capitals and the rest of the Inscription in Small-Letters, using Italics for difference.

_Beauty of Form_ may safely be left to a right use of the chisel, combined with a well-advised study of the best examples of Inscriptions: such as that on the Trajan Column (see Plates I., II.) and other Roman Inscriptions in the South Kensington and British Museums, for Roman CAPITALS; and sixteenth and seventeenth century tombstones, for Roman small-letters and _Italics_.[121] If the simple [p392] elementary form of the letter be cut firmly and directly, it will be found that the chisel will suggest how that form may be made beautiful. This may be shown, for example, by an attempt to carve a quite simple Incised letter with no Serifs and with all the strokes equally thick. In making the ends of the strokes nice and clean it will be found that there is a tendency to spread them into Serifs, and the letter is at once, in some sort, beautified (see fig. 209).

_Drawing out._--Take paper and pencil, or what you will, and write out the words of the Inscription in Capitals, or small-letters (or both), without any regard to scale or the shape of the space the Inscription is to go in. The carver will then see easily of what letters and words his Inscription is composed. Next draw the shape of the Inscription space (say to 1 inch or 1-1/2 inch scale), and in that space set out the Inscription, either "_Massed_" or "_Symmetrical_," as has been decided. The drawing should be neither scribbled nor elaborated. A good plan is to cut the lead of the pencil to a chisel shape. The natural _thicks and thins_ of the letters (see p. 44) may then be produced easily and quickly. The carver will thus be able, after a little experience, to calculate quite easily what size he will be able to carve his letters, what space he will be able to leave between the lines, and what margins he can afford.[122] [p393]