The Stadler Eurolight (known as the Vossloh Eurolight until 2015) is the brand name for a family of 4-axle Bo'Bo' mainline diesel-electric locomotives with sub-20-tonne axleloads for passenger and freight trains produced by Stadler Rail.
The Eurolight series was announced by Vossloh during 2009, the first examples were completed and commenced testing in the following year. The type has been intentionally developed to support use on secondary lines without limiting power or speed performances, making it suitable for mixed traffic operations. Specific versions of the Eurolight have been developed for the United Kingdom market, and a 6-axle Co'Co' machine for narrow gauge Asian markets, named UKLight and AsiaLight respectively. Furthermore, an electro-diesel locomotive derivative of the UKLight that shares much of its design, referred to as the Stadler Euro Dual, has also been developed and introduced during the late 2010s.
Background and design
In 2009, Vossloh announced its intention to expand its diesel locomotive range to include further shunting/light mainline locomotives with either hydraulic or electric transmissions, and to produce a mainline diesel-electric locomotive (EURO Light) for markets where an axleload below 20t is required. The four-axle EuroLight was designed to have a low axle load for use on cross-border operations on non-electrified European secondary routes, enabling operators to bypass bottlenecks on main corridors. It is reportedly suited for mixed-traffic operations, and can be outfitted to haul both passenger services and freight consists alike.
The locomotive used numerous components from the 2022t axleload Vossloh Euro locomotive series. Differences include the adoption of a C175 engine from Caterpillar Inc. (12- or 16-cylinder of 2.3 or 2.8MW) and traction equipment supplied by ABB Group. In comparison to the Vossloh Euro, a noticeable reduction in mass was achieved, which has been attributed to the adoption of a lighter engine/alternator set, as well as using lighter weight auxiliary system components. The bogie is the design used in the RENFE Class 334 locomotive, with coil spring primary and secondary suspension. Wherever feasible, elements of the engine and traction system are composed of lighter aluminium rather than steel.
For greater efficiency, the CAT engine has been furnished with electronically regulated fuel injectors, enabling it to be precisely tuned to match the demands being placed on the engine at that time; factors taken into account include load, speed, engine temperature, ambient air temperature, and fuel temperature. For further fuel savings, automated stop-start technology has been incorporated to shut the engine down at times of inactivity and restart when required or to keep coolant temperatures above a set threshold; this behaviour can be manually overridden by the driver if desired. It is also equipped with turbochargers and after-cooling apparatus. The engine incorporates its own telemetry equipment, separate from the general system used by the locomotive; these systems aid in performance analysis and fault reporting. It is reportedly to be serviceable at trackside locations and requires a major service to be performed at intervals of 18,000 operating hours, reducing the need for the locomotive to return to the operator's depots.
The CAT engine conform to European Stage IIIA emission standards, and can be modified to meet 2012 IIIB emission standards by replacing the exhaust silencer with a diesel particulate filter. Implementing such equipment in some regions can be complicated by the need to adhere to restrictive loading gauges, such as that predominantly used in the United Kingdom; accordingly extensive redesigning may be required. Both the engine and traction apparatus are frame mounted to reduce unsprung mass, being typically fitted using a five-point flexible mounting system, the mounting points of which being intentionally isolated.