The British Australian Oil Company Limited was a British-owned company—incorporated in 1910—that mined oil shale and produced shale oil and refined oil products, in New South Wales, Australia, during the years from 1911 to 1915.

Origins

The precursor of the company was the Australian Shale Syndicate Limited, which had been registered in 1895 and had purchased the remaining period of some 20-year oil shale leases, for £25,000. Until 1904, it had leased its oil shale properties, at Airly, to Australian Kerosene Oil & Mineral Company, for a royalty payment of seven shillings per ton of the shale mined. In 1905, it took over oil shale leases at Mount Temi near Murrurundi and from around 1906 it was verifying and planning to exploit that resource.

British Australian Oil Company

The presence there of oil shale had been known, since at latest around 1872. The seams of shale at Mount Temi were between four and six feet in total thickness, consisting of a lower seam of 'export quality' shale, around 22 inches thick and essaying 110 to 130 imperial gallons of crude oil per long ton, and an upper seam of lower-quality oil shale that was nonetheless viewed as suited to shale oil production, if worked in conjunction with the richer 'export quality' shale. By December 1906, it was seeking permission for the construction of a branch railway that would run along Elizabeth Street, Murrurundi, and was considering the means to bring the shale from Mount Temi over Page Mountain. In May 1907, it was seeking to set up a company to raise capital.

British Australian Oil Company

By mid 1907 development of the mine was well underway, with 13 men working there. Fifty acres of land had been set aside for a settlement near the mine, and there were already four bark huts and a tent there for accommodating the miners. By September 1908, a main haulage tunnel extended 400m into the seam.

British Australian Oil Company

In March 1910, the Australian Shale Syndicate sold its oil shale properties to a newly-floated British company, the Australian Oil Company, for £130,000. The new company had a nominal capital of £300,000, of which £170,000 was available as working capital. The Australian Oil Company—after finding that a company of that name already existed in Australia—changed its name, around mid-1910, to the British Australian Oil Company.

History of operation, technology, and products

The British Australian Oil Company's operations near Murrurundi consisted of a shale mine at Mount Temi (north of Murrurundi), a 3½ mile (5.6 km) long, 'Bleichert'-type double-rope aerial ropeway carrying mined shale, and retorts at the base of Page Mountain (close to Murrurundi). The retorts were vertical retorts of the 'Young and Fyfe' type. The retort site was connected via a one mile (1.6 km) long private branch railway, which passed over a twenty-span timber bridge that crossed Pages River and ended at an exchange siding near Temple Court railway station on the Main North railway line. The branch line was worked by a single tank locomotive owned by the company, the former NSWGR locomotive 353. Crude oil produced in the retorts was first stored in two large tanks, of 30,000 gallons each, and then sent in company-owned tank wagons to a refinery that was located in the Newcastle suburb of Hamilton. The retorts also produced ammonia, as a by-product, which was used to produce ammonium sulphate. For use in the process to produce the ammonia and for other purposes, water was drawn from Pages River, through a pipeline to a reservoir near the retorts. The refinery made kerosene, gas, lubricating oils, paraffin wax, greases, and other products. It was located west of Hamilton Junction, adjacent to the Newcastle gasworks, and employed 100 men on its 20 acre site.

Included in the assets acquired from the Australian Shale Syndicate were two oil shale mines located far from Murrurundi. The company operated a mine close to the railway line south of Capertee—the Crown Ridge mine—from which oil shale was supplied for town gas enrichment. It operated the Glenowlen Mine at Airly, in the same region, which supplied the Commonwealth Oil Corportation's retorts at nearby Torbane, until those retorts closed in mid 1913.

Work on building the works at Murrurundi began in August 1910. In early 1912, the company remained optimistic; crude oil production had started later than originally planned, but nonetheless had commenced in October 1911, and products were in the market ahead of the date given in the prospectus. In April 1912, fifty tons of fuel oil was sold to the Royal Australian Navy to trial its suitability on the destroyer HMAS Parramatta.