[Illustration: LETTERING AND GILDING PRESS, No. 1.]
A description of the various processes to produce by stamping the rich effects of inlaid work will be found under the head of Illuminated Binding and that of Inlaid Ornaments. For publishers' work it is a point of economy to have a steel-cutter that will cut out the pattern at one blow. For this kind of work, coloured German paper is used instead of leather for inlaying.
Thin boards are cut out with the aid of steel-cutters and the stamping-press, and affixed to the volumes; and, after they are covered, they are stamped in gold and blind with patterns corresponding with the figure of the cutter. This can only be applied where there are a large number of volumes, although single volumes may be cut out by hand at an increase of expense.
The modernized Gothic design (Plate IX.) is intended for a side-plate, to be worked either in gold or blank. The light floriated design (Plate X.) is calculated to be worked in gold, and is a good illustration of the prevailing treatment of the style for which it has been expressly designed. The pattern upon Plate XI. is intended for press-work, to be blank-stamped. The contrast of light and heavy work producing a fine effect, it is well adapted for a side-stamp, especially for cloth-work.
_Expressly for Cloth after Holbein's Style._]
Plate XII. is a graceful design from a "Hint" of Mr. Leighton's. It is suited for a side-stamp, to be worked in gold; and with it closes our illustrations of design.
To obviate a difficulty that the young finisher will experience in his first attempts at designing, let him select a good quality of sized paper, cut it to the required size, then fold it carefully into four parts, and draw his pattern boldly upon one of the four corners with a lead-pencil. After that is done, slightly damp the opposite corner, fold the drawn portion so that it comes in contact with the damp surface, and rub it upon the back, so as to transfer the outlines of the drawing. When it appears with sufficient distinctness, trace it carefully over with the pencil, and repeat the process upon the other corners until the pattern is complete. This method insures accuracy and expedition. In working a pattern with gouges or with intersected lines, the same principle is applied, so as to reproduce the pattern precisely alike at the four corners, and to save time. In this case the paper is folded, and one impression of the tool answers for both sides of the pattern.