(4) The sewers never overflow, as is frequently the case in the combined system.
(5) The sewers being small, no decomposition takes place therein.
(6) Sewers of small diameter need no special means of ventilation, or main traps on house drains, and can be ventilated through the house pipes.
On the other hand, the disadvantages of the separate system are:
(1) The need of two systems of sewers, for sewage and for rain water, and the expense attached thereto.
(2) The sewers used for sewage proper require some system for periodically flushing them, which, in the combined system, is done by the occasional rains.
(3) Small sewers cannot be as well cleaned or gotten at as larger ones.
The separate system has been used in Memphis and in Keene, N. H., for a number of years with complete satisfaction. Most cities, however, use the combined system.
=Definitions.=--A sewer is a conduit or pipe intended for the passage of sewage, waste, and rain water.
A _House Sewer_ is the branch sewer extending from a point two feet outside of the outer wall of the building to its connection with the street sewer, etc.
=Materials.=--The materials from which sewers are manufactured is earthenware "vitrified pipes."
Iron is used only for pipes of small diameter; and as most of the sewers are of greater diameter than six inches, they are made of other material than iron.
Cement and brick sewers are frequently used, and, when properly constructed, are efficient, although the inner surface of such pipes is rough, which causes adherence of sewage matter.
The most common material of which sewers are manufactured is earthenware, "vitrified pipes."
"Vitrified pipes are manufactured from some kind of clay, and are salt-glazed inside. Good vitrified pipe must be circular and true in section, of a uniform thickness, perfectly straight, and free from cracks or other defects; they must be hard, tough, not porous, and have a highly smooth surface. The thicknesses of vitrified pipes are as follows:
4 inches diameter 1/2 inch thick 6 " " 1/16 " " 8 " " 3/4 " " 12 " " 1 " "
The pipes are made in two- and three-foot lengths, with spigot, and socket ends." (Gerhardt.)
Sewer pipes are laid in trenches at least three feet deep, to insure against the action of frosts.