BGP hijacking (sometimes referred to as prefix hijacking, route hijacking or IP hijacking) is the illegitimate takeover of groups of IP addresses by corrupting Internet routing tables maintained using the Border Gateway Protocol (BGP).
Background
The Internet is a global network in enabling any connected host, identified by its unique IP address, to talk to any other, anywhere in the world. This is achieved by passing data from one router to another, repeatedly moving each packet closer to its destination, until it is hopefully delivered. To do this, each router must be regularly supplied with up-to-date routing tables. At the global level, individual IP addresses are grouped together into prefixes. These prefixes will be originated, or owned, by an autonomous system (AS) and the routing tables between ASes are maintained using the Border Gateway Protocol (BGP).
A group of networks that operates under a single external routing policy is known as an autonomous system. For example, Sprint, Verizon, and AT&T each are an AS. Each AS has its own unique AS identifier number. BGP is the standard routing protocol used to exchange information about IP routing between autonomous systems.
Each AS uses BGP to advertise prefixes that it can deliver traffic to. For example, if the network prefix is inside AS 64496, then that AS will advertise to its provider(s) and/or peer(s) that it can deliver any traffic destined for .
Although security extensions are available for BGP, and third-party route DB resources exist for validating routes, by default the BGP protocol is designed to trust all route announcements sent by peers, and few ISPs rigorously enforce checks on BGP sessions.
Mechanism
IP hijacking can occur deliberately or by accident in one of several ways: An AS announces that it originates a prefix that it does not actually originate. An AS announces a more specific prefix than what may be announced by the true originating AS. An AS announces that it can route traffic to the hijacked AS through a shorter route than is already available, regardless of whether or not the route actually exists.
Common to these ways is their disruption of the normal routing of the network: packets end up being forwarded towards the wrong part of the network and then either enter an endless loop (and are discarded), or are found at the mercy of the offending AS.
Typically ISPs filter BGP traffic, allowing BGP advertisements from their downstream networks to contain only valid IP space. However, a history of hijacking incidents shows this is not always the case.
The Resource Public Key Infrastructure (RPKI) is designed to authenticate route origins via cryptographic certificate chains demonstrating address block range ownership, but is not widely deployed yet. Once deployed, IP hijacking through errant issues at the origin (via both accident or intent) should be detectable and filterable.
IP hijacking is sometimes used by malicious users to obtain IP addresses for use in spamming or a distributed denial-of-service (DDoS) attack.
When a router promulgates flawed BGP routing information, whether that action is intentional or accidental, it is defined by the Internet Engineering Task Force (IETF) in RFC 7908 as a "route leak". Such leaks are described as "the propagation of routing announcement(s) beyond their intended scope. That is, an announcement from an Autonomous System (AS) of a learned BGP route to another AS is in violation of the intended policies of the receiver, the sender, and/or one of the ASes along the preceding AS path." Such leaks are possible because of a long-standing "…systemic vulnerability of the Border Gateway Protocol routing system…"
BGP hijacking and transit-AS problems
Like the TCP reset attack, session hijacking involves intrusion into an ongoing BGP session, i.e., the attacker successfully masquerades as one of the peers in a BGP session, and requires the same information needed to accomplish the reset attack. The difference is that a session hijacking attack may be designed to achieve more than simply bringing down a session between BGP peers. For example, the objective may be to change routes used by the peer, in order to facilitate eavesdropping, black holing, or traffic analysis.