5th. To protect the plate from the effects of wear, produced by the operation of printing, the following process is employed: The surface of the plate is covered with a thin coating of copper, by the electrotype process, before submitting it to the operation of printing; and when that pellicle or coating of copper begins to show signs of wear, it must be removed altogether, by plunging the plate in ammonia, or in a weak acid, which, by electro-chemical action, will dissolve the copper, without effecting the metal under it; the plate is then coppered again, by the same means, and is then ready for producing a further number of impressions. This re-coating operation may be repeated as many times as may be required. The following is the description of the whole process, which is divided into two parts, consisting of a preparatory and printing process.
_Preparatory Engraving._--For this operation which is the most delicate, it is necessary to have--1. A saturated solution of caustic potash. 2. Pure nitric acid at 36° of the barometer of Beaumé (spec. grav. 1·333). 3. A solution of nitrate of potassa, composed of 100 parts of water, and 5 parts of nitrate, by weight. 4. A solution of common salt, composed of water 100 parts, and salt 10 parts by weight. 5. A weak solution of ammoniacal chloride of silver, with an access of ammonia. The ammoniacal chloride of silver must be diluted with 15 or 20 parts of pure water. In the description of the process, this solution will be called ammoniacal chloride of silver. 6. A weak solution of ammonia, containing 4 or 5 thousandths of liquid ammonia. This solution will be called ammoniacal water. 7. A weak solution of caustic potash, containing 4 or 5 thousandths of the saturated solution, which will be called alkaline water. 8. A solution composed of water 4 parts, saturated solution of potash 2 parts, alcohol 1 part, all in volume. This solution will be called alcoholized potash. 9. Acidulated water, composed of water 100 parts, and nitric acid 2 parts, in volume. Besides, it is necessary to have three capsulæ or dishes, made of porcelain, large enough to contain the plate, and covered with an air-tight piece of ground plate glass, and two or three more capsulæ, which do not require to be covered; two or three glass funnels, to wash the plate; and two or three glass holders, in the shape of a spoon or shovel, by which the plate is supported when put in and taken out of the solution, without touching it with the fingers.