The forty years' progress in the case of the Holt liners has brought about an increase of 50 per cent. in the dimensions of the ship, the later Scotts' vessels being 441 ft. between perpendiculars, 52 ft. 6 in. in breadth, and 35 ft. in depth moulded, with a gross register of 7043 tons. In respect of deadweight capacity, however, there has been considerable development, due to the adoption of mild steel having permitted a reduction in the weight of boilers and engines, and in the scantlings of the hull. The new vessels, with a draught of 26 ft. 6 in., carry 8750 tons of deadweight cargo--two and a-half times the weight carried by the earliest Holt liners.
In forty years the steam pressure in the Holt liners has increased from 60 lb. to 180 lb.; and the piston speed from 400 ft. to 720 ft. per minute. The heating surface in the boilers has decreased from 6 square feet to 3 square feet per unit of power; and the condenser surface from 1.83 square feet to 1.3 square feet per unit of power. On the other hand, each square foot of grate gives now 14 horse-power, as compared with 6.6 horse-power formerly.
As a result of increased steam pressures and greater efficiency of propulsion, it may be taken that, notwithstanding the increase in dimensions and capacity of the ship, and the consequent advance in engine power, the coal required for a voyage half way round the world has been reduced to one half that of 1865.
Another notable feature in the economy of the ship is that twenty-five derricks have been fitted for dealing rapidly with the cargo, and one of these has a lifting capacity of 35 tons, to take such heavy units of cargo as locomotive boilers and tenders. In addition, there are eighteen steam winches. The reduction in the time spent in port, because of the facilities thus provided, is another element in the economy of the modern ship.
The largest oil steamer yet constructed, the _Narragansett_, was completed by the Scotts in 1903. This vessel, built for the Anglo-American Oil Company, carries in her sixteen separate compartments, 10,500 tons of oil, at a speed of 11 knots, for a fuel consumption of 4.9 lb. of coal per 100 tons of cargo per mile. This result is deduced from steaming, in ordinary service, over nearly 24,000 miles, and is consequently as reliable as it is interesting.