Class 201, Class 202 and Class 203 were the TOPS codes for a series of Diesel-electric multiple units built for the Southern Region of British Railways in 1957–86. They were classified by the Southern Region as 6S, 6L and 6B respectively, and known collectively as the Hastings Diesels or Hastings Units. They were built for service on the Hastings Line, which had a restricted loading gauge due to deficiencies in the construction of the tunnels when the line was built between 1845 and 1852. The Hastings Units served from 1957 to 1988, being withdrawn when the Hastings Line was electrified with single-track sections through some of the tunnels.
Background
The Hastings Line was built by the South Eastern Railway between 1845 and 1852 across the difficult terrain of the High Weald. The line connected and via . Due to lax supervision of the contractors who built the tunnels, these were built poorly, with an insufficient number of rings of bricks lining the bore. The solution was to add additional rings of bricks inside the tunnels affected. This led to a restricted loading gauge in the tunnels. Consequently, rolling stock built to this loading gauge had to be used on the line. Between Tonbridge and Grove Junction, "Restriction 1" stock could be used. Between Grove Junction and , "Restriction 0" stock had to be used. From Battle to Bopeep Junction, "Restriction 4" stock could be used.
From 1931, the Southern Railway Schools class steam locomotives were introduced to work the Hastings Line. Six Pullman carriages had been built in 1926 for use on the line. A further 104 carriages were built to Restriction 0 between 1929 and 1934. The first proposals to electrify the Hastings Line were put forward in 1937. Two electric locomotives built to Restriction 0 were ordered in that year. A third locomotive of the class was built at a later date than the first two. The April 1937 electrification proposal was deferred, with an alternative proposal being made in October of that year. The Second World War intervened before the scheme could be revived. In 1946, various electrification schemes were at the planning stage.
Post-war, the Southern Railway became part of the new British Railways on 1 January 1948, becoming the Southern Region of British Railways. Work planned by the Southern Railway on the various electrification schemes was not put into effect. The carriages built for the Hastings Line were refurbished at a cost of £100,000 in the early 1950s with the intent of giving them a further ten years' service. Approval for the construction of four new sets of eight carriages was given at this time. These vehicles were to be built to the same length as existing stock in use on the Hastings Line, . The underframes were to be built at Ashford Works. In 1955, the electrification of railway lines in the south east was decided upon. Lines from the London termini to Dover and Folkestone were given priority. It was decided not to electrify the line between and . The operating department objected to single line sections in tunnels which would have been needed to operate rolling stock built to the standard loading gauge. Further objections were on the grounds of cost and that the necessary works would disrupt traffic on the line for a year.
Due to its extensive experience with electric traction, the Southern Region favoured diesel electric trains. Although these came with a higher initial cost, it was thought that they would be more economic to operate and maintain. Twenty-three six-coach units were to be built. They took set numbers 1001-07 (6S), 1008-19 (6L) and 1031-37 (6B), formerly used by two-car trailer sets used with the pre-war 3SUB electric multiple units. Taylor Woodrow built a new depot at St Leonards-on-Sea, East Sussex, where the Hastings Units were to be serviced and maintained.
Technical description
All units were powered by two English Electric 4SRKT Mark II diesel engines. These were a development of the 4SRKT diesel engines fitted to diesel multiple units supplied by English Electric to Egyptian State Railways in 1947. The 4SRKT designation stood for 4-cylinder Supercharged Redesigned K-Type for Traction use. Cylinders were bore by stroke. A Napier MS100 turbocharger was fitted to each engine. An English Electric Type 824/1B generator was driven by the diesel engine. It had a continuous rating of , 600A at 550V. This supplied power to the traction motors. English Electric 507 or 511s being used. They were freely interchangeable with those in use on Southern Region electric multiple units.
Class 201 (6S)