(14) J. E. E. asks: What is the number of layers of wire, and the size used for the primary of the induction coil in the Blake transmitter, and as near as you can the amount used for secondary? A. For primary, use three layers of No. 20 magnet wire, and for the secondary use twelve or fourteen layers of No. 36 silk covered copper wire. The resistance of the secondary wire should be from 100 to 150 ohms.
(15) J. M. I. asks how to make a barometer by coloring ribbon, so that they will change color, indicating weather changes. A. Use a moderately strong solution of chloride of cobalt in water.
(16) O. C. H. writes: In reply to R. A. R., question 22, in Scientific American, December 4, I will say that some months ago I was engaged in running a saw mill, lathe, and shingle factory; was troubled with two hot boxes, and frequently had to stop and apply ice. Seeing in the Scientific American a reference to the use of plumbago, I sent for some, and after three or four applications was troubled no more with hot boxes.
(17) F. W. asks: What is the best way for return pipe to go into the boiler from radiators--steam at 60 lb. per square inch, fall 15 feet? A. If your job is properly piped you can bring your return pipe in at any convenient place in your boiler below the water line. If you go into the feed pipe, have your connection inside all other valves.
(18) L. T. G. writes: 1. I have four cells of carbon battery; the solutions are bichromate of potash and sulphuric acid. Also three cells of the Smee; sulphuric acid one part, to ten of water; and the four cells of the carbon battery are not sufficient to run my small electro-magnetic engine, for more than two or three minutes. I wish to know if it would be injurious to either one of the batteries if I should unite them both in one circuit, to run the engine, for about one or two hours at a time. A. The batteries will not be injured, but they will not work well together. Better increase the number of carbon elements. 2. Will either of the above batteries freeze in winter, or will cold weather affect their working? A. They will not freeze, but it is better to keep them at a temperature above freezing 3. Is it always best to use the largest wire in connecting batteries with any instrument, say, above No. 11 or No. 12 wire, as the larger the wire the less the resistance, thereby getting nearly the full power of the battery? A. Yes. 4. What purposes are quantity and intensity electricity best suited for respectively? A. Batteries are arranged for quantity or intensity according to the work to be done. The maximum effect is obtained when the battery elements are combined, so that the total resistance in the elements is equal to the resistance of the rest of the circuit.