The Lotus T128 is a Le Mans Prototype 2 (LMP2) designed by former Sauber technical director James Key and built by Advanced Design and Engineering Systems Solutions (ADESS) and Kodewa. It was used by Kodewa in the 2013 FIA World Endurance Championship under the name Lotus. Stéphane Chosse, the founder of ADESS, first proposed building a Le Mans prototype car in March 2011. The vehicle's construction began in February 2013, eleven months after Kodewa acquired two chassis. The T128's aerodynamic study was carried out using a computer-aided software mesh tool from Altair Engineering, and aerodynamics was the main priority in its design, with Chosse taking a similar approach as when he was involved in Formula One. It uses a naturally aspirated V8 engine from the BMW S65, which is also used in the company's M3 model, and produces around .
The programme was officially announced during the 2012 24 Hours of Le Mans race weekend, and its scheduled first test in December was delayed by seven weeks to allow for the installation of additional parts. Both cars failed to finish the season-opening 2013 6 Hours of Silverstone but finished in the top six at Spa-Francorchamps. A legal dispute over unpaid invoices arose during the 24 Hours of Le Mans, resulting in the cars being temporarily seized by bailiffs until a Le Mans court ordered their return after Lotus proved that the invoices were fictitious. Both cars failed to finish the race and the subsequent round in São Paulo. Lotus took their only podium of the season at the 6 Hours of Circuit of the Americas, but finished no higher than sixth in the final three races. The two T128s finished seventh and eighth in the FIA Endurance Trophy for LMP2 Teams. After the season, Lotus moved into LMP1 and replaced the T128s with a new car, the CLM P1/01.
Development
Concept
In March 2011, Stéphane Chosse, founder of the German-based Advanced Design and Engineering Systems Solutions (ADESS), announced preliminary plans to build a Le Mans Prototype car. A year later, German racing team Kodewa ordered two chassis for the 2013 FIA World Endurance Championship. ADESS and Kodewa developed it in the Bavarian capital of Munich's high-technology park. The T128 was also designed to meet the 2014 Le Mans Prototype 1 (LMP1) regulations, which significantly improved driver safety and visibility. The project was overseen by Kodewa co-founder Romulus Kolles, Lotus F1 Team manager Patrick Louis, Gravity Charouz Racing manager Antonin Charouz, and Petr Ptacek, owner of Czech car manufacturer Praga. Former Sauber technical director James Key assisted them. With Lotus as title sponsor, the Kodewa team adopted the Lotus name. Kodewa planned to sell the T128 to client teams for use in other championships.
Design
Altair Engineering's computer-aided design software was used for the car study. ADESS engineers used the HyperMesh tool to obtain numerical simulations using finite elements. Finally, the use of the Radioss software enabled the simulation of crash tests, which influenced the design of the monohull's front nose. The scale wind tunnel at the Mercedes-Benz Formula One team's Brackley headquarters was used to develop the design's aerodynamics. Choose stated that the car's aerodynamics were the main priority in its design, and he took a similar approach to his years in Formula One. The rollover protection structure is integrated into the carbon fibre reinforced polymer chassis. Automotive futurist Daniel Simon designed the car's black and gold livery. The suspension setup at the front and rear of the vehicle was a double wishbone pushrod actuated torsion bar with dampers housed inside the car's monocoque. It had bodywork elements that directed airflow into the chassis.
Its engine, a naturally aspirated V8 variant of the BMW S65 used in the company's M3 model, was angled at 90 degrees, and rebadged by Praga. For the best efficiency rate, engineers used the S65 production block, reducing its capacity to . The engine produces and a maximum speed of 9,500 revolutions per minute (rpm). When the driver reaches 7,000 rpm, the engine produces 405 NM of torque. Hewland Transmissions custom-designed and installed a six-speed sequential gearbox onto the car's engine. A single intake was mounted on the car's roof to allow airflow into it. The Brembo brake discs were made of carbon ceramic materials and also features power steering. The T128 monocoque began production in February 2013, and it was homologated a month later. After the car's launch, Igor Zamorano of Motorpasión wrote of his feeling that its front resembled the Audi R18.