[Illustration: _One of the earliest medieval illustrations of a windmill in England is this brass plaque (here redrawn) in St. Margaret's Church, King's Lynn, Norfolk. It tells the ancient joke on the good farmer riding to the mill: To relieve his tired horse of the burden, he carried the sack of grain on his own back! Note that the mill was a post mill and that it was slightly head sick._]
A post mill, as its name suggests, perches somewhat like a flagpole-sitter on the end of a sturdy post held upright by a timber framework. The Laws of Oleron, a breezily worded maritime code adopted in England about 1314, stated that "some windmills are altogether held above ground, and have a high ladder; some have their foot in the ground, being, as people say, well affixed." In the latter case the substructure of timber bracing was not above ground, but was buried in a mound of earth.
The comparison to a flagpole-sitter is perhaps misleading, for the post does not end where the mill house begins. Rather, it enters the body of the mill through a loose fitting collar beneath the lower floor and extends about half-way up into the mill, where it ends in a pivot bearing. The entire weight of the mill--sails, body, millstones, shafts, gears, grain, meal, and miller (to say nothing of the mill cat, kittens, and resident mice)--rests on this single bearing at the top of the great post.
Keeping so much weight in stable balance was no great problem for the millwright as long as the mill did not move. The collar or ring bearing around the post kept the body from tipping far in any direction--or was supposed to. Moreover, the millwright estimated the weights of the various elements and positioned them appropriately about the pivot. Of course, things sometimes came out wrong. A mill that tipped incurably forward was called "head sick"; one that always tipped backward was "tail sick."
When the mill was in motion the matter of stability became a good deal more complicated. For various reasons, including aerodynamic and gyroscopic effects that the early millwrights sensed but did not fully understand, the balance of a windmill is different in operation than at rest. The successful millwright, therefore, needed an accumulation of trial-and-error knowledge that might go back for generations.