The Royal Ordnance L11A5, officially designated Gun 120 mm Tk L11, is a 120 mm L/55 rifled tank gun design. It was the first of NATO's 120 mm main battle tank guns which became the standard calibre for Western tanks in the later period of the Cold War. A total of 3,012 of the L11 guns were produced by 2005. The list price was US$227,000 in 1990.
The L11 was developed by Britain's Royal Ordnance Factories to equip the Chieftain tank as the successor to the 105 mm L7 gun used in the Centurion tank. It was also used on the Challenger 1, which replaced the Chieftain in British and Jordanian service. The weapon has been superseded by the L30 series 120 mm rifled tank gun.
History
The Royal Armament Research and Development Establishment at Fort Halstead designed a new 120 mm rifled tank gun in 1957. The new gun was deemed to be necessary because the British Army specified engagement ranges greater than those of other armies, for example , as specified by the US Army, despite studies at the time that suggested engagement ranges were below those of the US Army requirements in the great majority of cases. The L11 was specifically designed to fit into the turret mountings of the Chieftain tank (FV4201). After firing trials in 1961, the L11 was accepted for service on the Chieftain in 1965 and entered service with the British Army in 1966.
During Operation Granby an L11 on a British Army Challenger 1 scored the longest tank-to-tank "kill" in military history, when it destroyed an Iraqi T-55 at a range of 4.7 km (2.9 miles) with an L23 "Fin" round.
Since its introduction, the L11 has evolved into eight production versions. In June 1976, development of new ammunition for the L11A5 was begun.
Production models
The Royal Ordnance basic L11 design was developed into a series of improved production models; the L11A5 was the major production version. L11A1 – The initial production variant; 130 were produced. L11A2 – RO Defence incorporated numerous minor changes, including a modified vent tube, an obturator sleeve protector, and a 15-hole vent tube magazine. Stronger material was used in fabricating the breech ring. L11A3 – This incorporated minor changes to the breech ring. L11A4 – Evaluation test prototype for an automatic loading system. L11A5 – This was the main production model. It introduced the integral Muzzle Reference System (MRS) and a smaller and lighter fume extractor which required the addition of of weight at the breech for balance. L11A6 – This was a conversion of the A3 to accommodate the Muzzle Reference System and fume extractor of the A5. L11A7 – A semi-automatic plunger was proposed for the vent tube loader, but did not enter production. L30 (EXP 32M1) – A further development of the L11 design, developed under the Challenger Armament program.
Design
The breech mechanism is a downward sliding semi-automatic breechblock. The gun was equipped with a hydro-pneumatic recoil system using two buffers. The gun recoils in most applications. This breechblock design was based on the breechblock on the Krupp/Skoda sFH 18/43 model 18 that the British studied extensively after the Second World War and perfected for use in the 120 mm gun.
Unlike most Western tank weapons which fire a single fixed round, the projectile and propellant are loaded separately. And unlike the Soviet 125-mm 2A46, the propellant is in the form of a combustible bagged charge (or later, a combustible charge case for armour-piercing rounds). This required the obturation to be provided by rings in the breech rather than the cartridge case, as in fixed rounds and 125 mm separate-loaded ones.
When first introduced, APDS (armour-piercing discarding sabot) rounds were fired using a cylindrical charge. High explosive squash head (HESH), smoke and other rounds used a hemi-cylindrical (i.e. a cylinder sliced in two lengthways) charge (the L3). Two HE charges could therefore be stowed in the same space as one AP charge. In the Chieftain and Challenger tanks, the charges were stored in 36 recesses surrounded by water jackets, so that a hit which penetrated the fighting compartment would rupture the jacket and drench the propellant, preventing a catastrophic ammunition fire (known colloquially as a "brew-up").
The barrel of the L11A5 is fitted with a bore evacuator approximately two-thirds of the way to the muzzle and a thermal sleeve.