MOUTH: Cut off complete heel. Stuff lightly and sew to head. Stitch across center to shape mouth (Figure 2).
TRUNK: Use an 8″ strip of sock, tapering from 6″ to 1″. Seam wrong side out, turn, stuff and insert wire. (See tips on wiring, page 33.) Sew to head above mouth. Insert pipe cleaner tusks (Figure 3).
EARS: For each ear cut two pieces from sock (Figure 4). Seam and turn right side out. Sew on level with highest point of trunk.
EYES: Sew on round or oblong buttons set apart. Embroider eyes for small children.
TAIL: Make a short roll of material and sew in place.
TRIM: Sew on a fringed or tasselled “blanket” of bright material. Rick rack, little bells, ribbons or beads will give a more circusy appearance.
[Illustration: Fig. 1 · Fig. 2 · Fig. 3 · Fig. 4]
For the body (Sock No. 1) follow the basic instructions for the monkey on page 5, but leave only 1″ of white at the ends of the legs and stuff plumper.
ARMS OR FORELEGS: See instructions for the monkey on page 5, leaving only 1″ of white and stuffing plumper.
NOSE: Cut toe from second sock. Stuff lightly and sew to the front of the head (Figure 1). Pull the head down to the chest and stitch securely (Figure 2).
FEATURES: Embroider a solid V-shaped nose in black yarn. Make three long stitches with brown yarn to form upper lip and mouth. Sew on two round brown buttons for eyes, spaced well apart (Figure 3).
EARS: Cut four ear pieces from sock. Sew two together, leaving an opening to turn. Turn and stitch to side of head, pleating the front half to incline ear forward. Repeat with the other ear (Figure 4).
TRIM: Tie a bow of 1″ wide bright ribbon around neck. Or make Mr. Teddy Bear a soldier, engineer, cowboy or any other colorful character by using the doll costumes shown in this book.
[Illustration: Fig. 1 · Fig. 2 · Fig. 3 · Fig. 4 · Fig. 5]
For body (Sock No. 1) follow the basic instructions on page 7, but stretch the body as long as you can as you stuff and make legs 2″ long instead of 5″.
FORELEGS: See instructions for elephant on page 7, but make 2″ long.
NOSE: Cut toe from sock and sew into a point on the wrong side (Figure 1). Turn and stuff lightly. Sew to front of head with seams on the top and bottom.
TAIL: From sock cut a strip 3″ long, 1″ wide and sew into a tube. Stitch to body.