In the following discussion the symbol Ø signifies the letter O where necessary for emphasis, and the symbol Δ signifies a 7-9 punch in card column 1.
The compiler operates under the ALGOL Control System. This system is a subordinate control routine of the Master Control System of the CO-OP Monitor Programming System. ALGOL is quite similar to the subordinate control routine COOP.
ALGOL is called with an MCS (Master Control System) card having ALGOL punched beginning in column 2. Other details of this card are available in descriptions of the CO-OP Monitor. It should be noted in selecting a standard recovery procedure that the concept of COMMON is not used in Algol.
Following the MCS card will be a control card giving instructions to the control routine ALGOL. It will name one of the following routines: ALGO, ALDAP, EXECUTE, BINARY, FORTRAN, REWIND or DEFINE. These will be discussed below.
The EOP (end-of-program) card has the characters 'EØP' punched in columns 10-14.
In the ALGO mode, one EOP card must be used to terminate the program.
In the ALDAP mode, one EOP card must be used to terminate each Algol program or Algol procedure being compiled separately.
The ALGO mode of running an Algol program is the simplest and the fastest. It will be the more suitable for a large number of programs. Unless the programmer has special reasons for using the ALDAP mode, the ALGO mode is recommended.
The Algol program must be self-contained except for standard procedures and library procedures on the library-systems tape. The job deck must have the following cards in the specified order:
The subordinate control routine name must be ALGØL. 2. ALGOL control card.
ΔALGØ. or ΔALGØ,t. where t is an integer specifying a time limit in minutes for compilation and execution.
(The period is required on every control card.) 3. LIB cards.
If necessary. One LIB card is required for each non-standard library procedure called in the program, namely those declared external. The format of a LIB card is as follows: the characters LIB punched in columns 10-12 and the name of a library entry point beginning in column 20. There may be no more than 20 LIB cards. 4. PROGRAM card.
If desired. This may be used to identify the program. Its format is described in the next paragraph. 5. Algol program deck. 6. EOP card. 7. Data.