For instance, in describing the scheme for providing the packing department with a description of the goods to be shipped, but with the quantity column blank, it will be remembered how a strip of paper of proper size wide enough to cover the quantity column was placed over the left side of the invoice from top to bottom. Therefore all quantities, instead of manifolding onto the packer's sheet, manifolded onto the strip of paper known as the _blind_.
A blind may be of any given shape, and cut away at the top, side, or bottom; or, in some cases, irregular-shaped cuts are made in the middle of the sheet or near the edges. The cuts are made in order to allow certain information to be manifolded on the next sheet under the blind. The balance of the information on the top sheet is manifolded onto the blind, which is thrown away. It is reasoned that it is cheaper to use a sheet of paper for this purpose than it is to stop and make a separate sheet with part of the information only, typewritten thereon.
HOW TO HANDLE ORDERS AND BILLS ON BILLING MACHINES
=Loose-Leaf Sheets with Invoices in Blanket Form.= In some lines of business it is possible to use invoices of equal size. Some firms therefore have the invoices and sales sheets of equal size. The top sheet is perforated horizontally at equal distances, which permits the invoices to be torn apart so that one blanket of form invoices may be separated into three or four separate invoices. This plan can be used where the work is done on an ordinary letter-writing machine. In preparing the papers for billing, a sheet of carbon equal in size to the sales sheet is used. A heavy-weight carbon (10lb.) with hard finish is the best kind of carbon to use for this work. If an extra sales sheet is needed for any purpose, a duplicate sheet of paper, preferably of another color, can be used with another sheet of carbon interleaved between the two sales sheets. This method is wasteful of space as far as the sales sheet is concerned. If each invoice were loose and placed in the machine in such a manner that the first written line on the invoice would be two or three spaces only below the last item of the previous invoice manifolded on the sales sheet, generally _one more_ invoice of average size could be manifolded onto the sales sheet.