[Illustration: A Ship of the Line, the dreadnought of former days.]
Each time a compass is compensated it is necessary to check the compensation by checking the deviation on various headings. This may be done by the use of deflector magnets. A more exact method is to swing the ship in a circle while bearings are taken of a known object on land and the deviation noted on various headings. The sun is often taken as a reference point for this purpose.
It is never necessary to swing ship or to correct the Gyro-Compass for either variation or deviation of any kind. Where a Gyro-Compass and a magnetic compass are both used on a ship, the ship may be swung to correct the magnetic compass—the Gyro-Compass furnishing true headings. The time required is thereby materially shortened.
When a steel ship is building a sub-permanent magnetism is induced in its keel, hull, and plates. It causes a compass deviation classed as “semi-circular.” This deviation must be compensated for.
As a ship moves through the earth’s magnetic fields in its varying quantities and directions, a temporary and varying magnetism is induced in the soft iron of the ship. The resultant deviation is classed as “quadrantal,” and must be compensated for.
The Sperry is not a Magnetic Compass. Hammering, riveting, and moving through magnetic fields may induce magnetism in the ship, but will have no effect upon the Sperry Gyro-Compass.
There is no condition of the ship or cargo for which the Gyro-Compass must be corrected.
[Illustration: An American Clipper, highest type of sailing ships.]
Change in the character or disposition of the cargo of the ship causes a change in the magnetic fields surrounding the compass. These changes must be compensated for.
The Sperry Gyro-Compass is not affected by any cargo. A cargo of iron ore has no more effect upon it than a cargo of cotton. You could even carry a load of strong magnets without causing the slightest deviation.
Changes in the temperature of the stack, due to shifting of the wind and force of draft, vary its magnetic characteristics. Consequently the Magnetic Compass is affected.
Temperature changes do not influence the Sperry Gyro-Compass.
No matter what the conditions are that change the magnetic characteristics of the stack, ship or cargo, they cannot affect the Gyro-Compass, as it has nothing whatever to do with magnetism.