Many kinds of wood are used in propeller construction, and the choice depends very largely on the speed and stress--in other words on the horsepower of the engine. Sometimes a propeller is built of alternating layers of two different kinds of wood. But with high-powered engines oak is very generally employed on account of its strength.
An airplane propeller is not carved out of a single block of wood, for in this case it would not be strong enough for the difficult task it has to perform of cutting its way through the atmosphere and drawing the airplane after it. Instead it is built up of a number of thicknesses of specially seasoned wood, so arranged that the surface is formed by the cross grains of the various layers. This result is produced by first piling up a number of boards to form a block out of which the propeller can be carved. The boards are glued firmly together and then they are subjected to tremendous pressure. Now expert wood carvers begin their delicate task of turning out a propeller of a given pitch. Their work requires the utmost skill, but they succeed, until gradually the finished article begins to take form out of the crude block. A coat of varnish, a fine metal hub--and our propeller is ready to be shipped to join the wings and the fuselage and complete the manufacture of a modern airplane.
There are several other items--such as the steel landing chassis, the steering instruments and the upholstery--which we must have on hand before we are ready to commence the work of assembling. When all have been procured the happy task begins. The wings are put in place, and carefully secured by wires and supporting struts. The steering apparatus is installed, the cushioned seats are placed in the cockpits, the fuselage is mounted on the wheeled chassis, and finally when all is complete the big bird is sent out for its first test flight.
If there is any one way in which the airplane of to-day differs radically in its process of manufacture from the airplane of a few years ago it is in this: that it is a _tested_ machine. The greatest enemy of the aviator was and always will be, not so much the bullets of an enemy as the hidden flaw in his machine's construction, which makes it "go back on him" when he least expects. The pioneer aviator built himself what he considered a "strong airplane," but when he attempted flight under weather conditions not so favorable as those on which he had counted, some untested part gave way. So in the early days there were many tragedies. To-day, the airplane has become a safe mount indeed, for not only is the finished machine tried out before it is put into use, but each separate part is subjected to the most exacting series of tests. If it does not bear up under at least six times the strain it will ever be called on to endure in flight, it is rejected as unfit.