Let us imagine ourselves on a visit to one of the great aircraft factories which have suddenly sprung up in the United States and become so busy with the work of turning out a huge aerial fleet. The great trees which were felled in the Northwestern woods have changed greatly in appearance since we saw them last. As a matter of fact for certain parts of the airplane they should have been allowed to lie out in the sun and rain for several years to "season," but the rush to put planes in the air has made this impossible. Instead they have been treated with a special process in order to rid the wood of its impurities. Now the big beams go to the carpenters to be fashioned into the airplane fuselage. The separate boards are carefully cut and fitted and trimmed down to perfect smoothness and symmetry. Painted and varnished the fuselage resembles a fine automobile body. In the top or roof of the fuselage one or more circular openings have been cut. Below, almost on the floor are the seats for pilot and observer, in what are known as the cockpits. While the carpenters and cabinet makers have been busy on the fuselage, more skilled workmen still have been fashioning the airplane wings. This is one of the most difficult and delicate tasks of all. Remember that the curve of the wing determines to a large extent the speed and climbing powers of the completed airplane. The wing is built up of a number of ribs which give it the proper curve and shape. Each of these ribs must be accurately manufactured from a prescribed formula. First a piece of board is turned out which looks exactly like a cross section of a wing. But there is no need for solid wood to add to the weight of the wing, and so all over its surface the workman goes, boring out circular pieces, until only a framework remains. On its upper and lower edges a flexible strip of wood is bent down to its shape and strongly attached. The rib is now complete. A number of ribs placed in a row begin to suggest the outlines of a wing. They are connected by long beams which run from tip to tip of the wing. When these have been fastened in place the skeleton is completed and the work of the carpenters is over for a little while.