6060 aluminium alloy is an alloy in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is much more closely related to the alloy 6063 than to 6061. The main difference between 6060 and 6063 is that 6063 has a slightly higher magnesium content. It can be formed by extrusion, forging or rolling, but as a wrought alloy it is not used in casting. It cannot be work hardened, but is commonly heat treated to produce tempers with a higher strength but lower ductility.

Alternate names and designations include AlMgSi, 3.3206, and A96060. The alloy and its various tempers are covered by the following standards:

6060 aluminium alloy

ASTM B 221: Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes EN 573-3: Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products EN 754-2: Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Mechanical properties EN 755-2: Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties ISO 6361: Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates

6060 aluminium alloy

Chemical composition

The alloy composition of 6060 aluminium is:

6060 aluminium alloy

Aluminium: 97.9 to 99.3%

Chromium: 0.05% max

Copper: 0.1% max

Iron: 0.1 to 0.3%

Magnesium: 0.35 to 0.5%

Manganese: 0.10%

Silicon: 0.3 to 0.6%

Titanium: 0.1% max

Zinc: 0.15% max

Residuals: 0.15% max

Properties

Typical material properties for 6060 aluminum alloy include:

Density: 2.710 g/cm3, or 169 lb/ft3. Young's modulus: 70 GPa, or 10 Msi, or 303 EMEC Ultimate tensile strength: 140 to 230 MPa, or 20 to 33 ksi. Yield strength: 70 to 180 MPa, or 10 to 26 ksi. Thermal Expansion: 23.4 μm/m-K. Solidus: 610 °C or 1130 °F.

References

Aluminum alloy table

Aluminium alloys

Aluminium–magnesium–silicon alloys