But, of course, in cutting a curd fine there is danger of waste--waste of curd, but not necessarily waste of butter, unless the curd is sour. Then it is impossible to avoid waste of butter by any process that we are aware of--and with a sour curd there is all the more necessity for cutting fine and cooking rapidly and thoroughly. With proper care, the evil of sour milk can be avoided. With good sweet milk and proper management, there is very little danger of waste of any kind, cut as fine as we can with the common knife.

We would cut so that the pieces when cooked should not be larger than kernels of corn; and though many object to it, we should not, if the pieces were as small as buckwheat--and as regular in size. We would not use a knife with the blades more than a quarter of an inch apart. Though we have never used a knife for cutting horizontally, the idea commends itself to our judgment. We would carefully cut first with the horizontal knife, leaving the thin slabs of curd lying one upon the other. Then, without waiting for the whey to rise or the curd to sink, we would use the perpendicular blades lengthwise of the vat, reducing the slabs to long square strips, and follow this with the cross-cutting until the pieces were at least as small as beechnuts. After this, the curd may be allowed to stand a few minutes, for the whey to separate, before starting the heat--provided the milk is sweet enough to permit of delay. But if the milk should give any indication of being old, we would begin at once to gradually raise the heat; if quite old and changed, we would crowd the heat as fast as practicable.

Hints on cheese-making — Part 35

To sum up in brief, we would cut a curd and complete the cutting as soon as it can be done without waste; we would cut it as expeditiously as possible and with as few motions; we would cut it as fine as care against waste would warrant; we would raise the heat as gradually and evenly as circumstances would permit; we would cook as thoroughly and as evenly as possible; we would keep up the heat until the curd is done; we would then let the acid develop in the whey until it is plainly changed; we would dip as warm as convenient, drain and salt, cool to at least 80°, and then put to press. With good milk, good rennet and a good place to cure the cheese in, we should expect in this way to turn out a tip-top article.

Hints on cheese-making — Part 35