The Very Large Telescope (VLT) is a facility operated by the European Southern Observatory, located on Cerro Paranal in the Atacama Desert of northern Chile. It consists of four individual telescopes, each equipped with a primary mirror that measures 8.2 meters in diameter. These optical telescopes, named Antu, Kueyen, Melipal, and Yepun (all words for astronomical objects in the Mapuche language), are generally used separately but can be combined to achieve a very high angular resolution. The VLT array is also complemented by four movable Auxiliary Telescopes (ATs) with 1.8-meter apertures.
The VLT is capable of observing both visible and infrared wavelengths. Each individual telescope can detect objects that are roughly four billion times fainter than what can be seen with the naked eye. When all the telescopes are combined, the facility can achieve an angular resolution of approximately 0.002 arcsecond. In single telescope mode, the angular resolution is about 0.05 arcseconds.
The VLT is one of the most productive facilities for astronomy, second only to the Hubble Space Telescope in terms of the number of scientific papers produced from facilities operating at visible wavelengths. Some of the pioneering observations made using the VLT include the first direct image of an exoplanet, the tracking of stars orbiting around the supermassive black hole at the centre of the Milky Way, and observations of the afterglow of the furthest known gamma-ray burst.
General information
The VLT consists of an arrangement of four large (8.2 metre diameter) telescopes (called Unit Telescopes or UTs) with optical elements that can combine them into an astronomical interferometer (VLTI), which is used to resolve small objects. The interferometer also includes a set of four 1.8 meter diameter movable telescopes dedicated to interferometric observations. The first of the UTs started operating in May 1998 and was offered to the astronomical community on 1 April 1999. The other telescopes became operational in 1999 and 2000, enabling multi-telescope VLT capability. Four 1.8-metre Auxiliary Telescopes (ATs) have been added to the VLTI to make it available when the UTs are being used for other projects. These ATs were installed and became operational between 2004 and 2007.
The VLT's 8.2-meter telescopes were originally designed to operate in three modes: as a set of four independent telescopes (this is the primary mode of operation). as a single large coherent interferometric instrument (the VLT Interferometer or VLTI), for extra resolution. This mode is used for observations of relatively bright sources with small angular extent. as a single large incoherent instrument, for extra light-gathering capacity. The instrumentation required to obtain a combined incoherent focus was not originally built. In 2009, new instrumentation proposals were put forward to potentially make that observing mode available. Multiple telescopes are sometimes independently pointed at the same object, either to increase the total light-gathering power or to provide simultaneous observations with complementary instruments.
Unit telescopes
The UTs are equipped with a large set of instruments permitting observations to be performed from the near-ultraviolet to the mid-infrared (i.e. a large fraction of the light wavelengths accessible from the surface of the Earth), with the full range of techniques including high-resolution spectroscopy, multi-object spectroscopy, imaging, and high-resolution imaging. In particular, the VLT has several adaptive optics systems, which correct for the effects of atmospheric turbulence, providing images almost as sharp as if the telescope were in space. In the near-infrared, the adaptive optics images of the VLT are up to three times sharper than those of the Hubble Space Telescope, and the spectroscopic resolution is many times better than Hubble. The VLTs are noted for their high level of observing efficiency and automation.
The 8.2 m-diameter telescopes are housed in compact, thermally controlled buildings, which rotate synchronously with the telescopes. This design minimises any adverse effects on the observing conditions, for instance from air turbulence in the telescope tube, which might otherwise occur due to variations in the temperature and wind flow.