The Triumph Bonneville is a standard motorcycle featuring a parallel-twin four-stroke engine and manufactured in three generations over three separate production runs.
The first two generations, by the defunct Triumph Engineering in Meriden, West Midlands, England, were 1959–1983 and 1985–1988.
The third series, by Triumph Motorcycles in Hinckley, Leicestershire, began in 2001 and continues to the present as a completely new design that strongly resembles the original series.
The name Bonneville derives from the famous Bonneville Salt Flats, Utah, USA where Triumph and others attempted to break the motorcycle speed records.
Development history
T120 Bonneville
The original Triumph Bonneville was a 650 cc parallel-twin motorcycle manufactured by Triumph Engineering and later by Norton Villiers Triumph between 1959 and 1974. It was based on the company's Triumph Tiger T110 and was fitted with the Tiger's optional twin 1 3/16 in Amal monobloc carburettors as standard, along with that model's high-performance inlet camshaft. Initially it was produced with a pre-unit construction engine which enabled the bike to achieve 115 mph without further modification, but later in 1963 a unit construction model was introduced which was stiffer and more compact, including additional bracing at the steering head and swing arm. The steering angle was altered and improved forks were fitted a couple of years later, which, together with the increased stiffness enabled overall performance to match that of the Bonneville's rivals. Later T120 Bonnevilles used a new frame which contained the engine oil instead of using a separate tank; this became known as the oil in frame version. The T120 engine, both in standard configuration and especially when tuned for increased performance, was popular in café racers such as Tribsas (BSA frame) and particularly Tritons (Norton featherbed frame).
T140 Bonneville
The 650 cc T120 Bonneville, was joined in 1973 by the T140 Bonneville, the same basic machine but with a 750 cc engine. Designated T140V, the new Bonneville featured a larger-capacity engine of 724 cc, a five-speed gearbox and a single disc front brake. Shortly after, the engine was further bored out to 744 cc. After a factory lock-in by the Meriden workers for over a year kept Triumph twin cylinder models off the market place, only the larger Bonneville returned afterwards in 1975. By then, the gearchange foot lever had been moved from right to left to comply with new regulations mandated for the American market and a rear disc brake fitted. Several T140 models followed featuring various styling and engineering modifications and refinements including electronic ignition from 1979 and electric starting from 1980 until production ceased with the closure of the Meriden works in 1983.
Although this should have been the end of the Bonneville, as it turned out it was not. Triumph Motorcycles was acquired by businessman John Bloor, who licensed a company called Racing Spares in Devon, run by Les Harris to manufacture the T140 Bonneville. These continuation bikes known as 'Devon’ or ‘Harris’ Bonnevilles did not reach the market until 1985 and were not sold in the U.S. market. Production of these ended in 1988.
New Bonneville (800, 900 & 1200) Bloor's Triumph Motorcycles Ltd launched a completely new model, the Bonneville 800 (790cc), in September 2001. Originally built exclusively in Hinckley, England, some models are now (2014) produced at the company's Thailand manufacturing facility, which also makes components and accessories for various Triumph motorbikes. The new Bonneville strongly resembles the earlier models in style and basic configuration, but with modern engineering. At the debut the new version was given a 790 cc parallel-twin engine, with the up-spec T100 receiving an 865 cc engine from 2005. From 2007 on, all Bonnevilles received the 865 cc engine. Through 2007, all engines had carburettors; electronic fuel injection (EFI) was then introduced to the 2008 models in Britain and to United States models in the 2009 model year, in both cases to comply with increasingly stringent emissions requirements. Dummy carburettors, which are actually redesigned throttle bodies made to resemble carburettors, have been added to the 2009 models to retain the original vintage styling of previous years. For 2016, Triumph introduced an all new T120 1200cc 270° liquid-cooled, SOHC, version of the Bonneville, then in 2017 a T100 900cc version.