[Sidenote: _Silkoline, cheese cloth, rags_]

[Sidenote: _Candle-wicking, chenille, and macremé cord_]

Hand-Loom Weaving — Part 34

In splicing such materials as silkoline, rags, candle-wicking, chenille, and macremé cord, lay the end of one piece over another, each lapping about one-quarter inch, and sew securely with silk or thread of like color. Cut off the selvedge ends of rags. These strips can be run past each other, but the work will not be so smooth.

Hand-Loom Weaving — Part 34

[Sidenote: _Germantown wool, heavy worsteds, and rope silk_]

Hand-Loom Weaving — Part 34

In splicing Germantown wool, heavy worsteds, or rope silk, thread a worsted needle with one strand obtained by unwinding the wool or silk, lay one end over the other, and sew over and over. Twist the part just sewn between the thumb and finger and the splicing will be hardly visible.

When weaving stripes, splice the wool so that the piecing will come on top of the rod. In this way the new color will start at the edge of the rug, as it should, and the number of loops on the rod will be the same on each side. Consider the _under_ side of the weaving as the _right_ side. It is always smoother and cleaner, and the splicing can be done more neatly on top of the rod.

Splicing raffia is the most difficult of all, and the method used in braiding and basket weaving is the best. As you near the end of a strip in weaving it usually becomes narrower. Find another strip having a narrow end, and place one over the other, securing, if necessary, by winding a very narrow piece--just a thread torn from a long piece--and fastening this by sewing a few times over and over. Or, the two narrow ends may be run past each other, as in carpet ravelings. Care should be taken to have the splicing the same width as the other parts of the weaving, so that the spliced parts will not be noticeable.

[Sidenote: _Leather, leatherette, and celluloid strips_]

Leather, leatherette, and celluloid strips should be long enough to extend the entire width and length of the frame without splicing. The ends can be cut, as is done in paper weaving, or turned in some pretty way like that in the splint work.

[Illustration: _Silkoline rug with three white stripes_]

Silkoline rugs or mats are by far the prettiest for doll-house use. The method of preparing the strips is explained under Materials (page 51). Make the warp with twine of the same color as the silkoline. It should be a three-eighths-inch warp. Choose a plain color for the body of the rug, and a short distance from each end weave several stripes of a contrasting color. The rug in the illustration is of deep cardinal. The stripes can be of olive green, black, or any preferred color. Mottled stripes are also attractive and effective. When the stripes at the foot are woven, ascertain the distance from the foot piece to the last one. To know where to commence the first stripe at the head, measure the distance just found from the head piece down, and mark on both rods by tying or sewing a colored string to the warp. This helps the child to understand where the stripe should begin, which he soon learns to measure for himself; and this training in accuracy and independence is most excellent. There is nothing better than learning self-reliance, and the child who has been taught it, is not apt to ask others to do his examples for him. To learn the manner of making the stripes and spaces each of the same width, count the loops on the rods (one has to weave twice across the loom to have one loop on a rod), and have the same number on each side. Care should be taken not to _twist_ the strips in weaving. The method of splicing the strips and fastening the warp strings is explained in Chapter V. The rug may be finished with a wool or silk fringe of the predominating color, or a fringe of the combined colors. If desired, it may be left plain, catching the woof strips together at each end to conceal the warp strings. When a mistake has been made, run the needle back under the same strings instead of pulling out what is wrong. It prevents stretching and a destruction of the material.