[Illustration: FIG. 420. CONNECTED TREBLES.]

CROSSED TREBLES (figs. 421 and 422).—Trebles of this sort produce an open stitch, which is often used for the footing of lace, or for an insertion. Make a foundation of chain, or other stitches, and proceed as follows: 3 chain, miss 2 stitches of the row beneath, make 1 treble in the third stitch, 5 chain, 1 over, put the needle in between the loops of the connected trebles and finish with a treble. Then make a double over, put the needle into the next loop of the preceding row, make another over, draw the needle through the loops, make another over and join the two next loops. This leaves 3 loops on the needle. Make an over, put the needle into the third stitch of the row beneath, make an over, and bring the needle back to the right side.

Encyclopedia of Needlework — Part 115

[Illustration: FIG. 421. CROSSED TREBLES.]

Encyclopedia of Needlework — Part 115

[Illustration: FIG. 422. CROSSED TREBLES, SET BETWEEN THOSE OF THE PRECEDING ROW.]

Encyclopedia of Needlework — Part 115

Join the 5 loops on the needle together, 2 and 2, make 2 chain, 1 over, put the needle into the upper parts of the connected trebles and finish with a treble, and so on.

These trebles also can be lengthened if necessary, but in that case, the width of the crossed treble must correspond with the height. Generally speaking you make the trebles over the same number of stitches as you made overs on the needle, which should always be an even number.

TREBLES FOR A CHAIN.—A quicker way of making a wide footing for a crochet lace is to make the trebles in the following manner.

Make 4 chain stitches, 2 overs, put the needle into the first of the 4 chain, 1 over, draw the thread through the stitch *, 1 over, draw the thread through the next 2 loops and repeat twice from * = ** 2 overs, put the needle into the left bottom part of the treble, close the treble as before and repeat from **.

(5) KNOT STITCH (fig. 423).—This stitch which is composed of several loops forming a tuft, can only be worked from one side, consequently all one way. It looks best in a coarse material to show the interlacing of the threads.

Enter the needle through the two loops of the stitches of the bottom row, turn the thread round the needle, but away from you towards the back; bring it forward to the right side, put the needle again through one of the bottom stitches, make another over like the first and draw the needle through all the bars at once.