The Airspeed AS.6 Envoy was a twin-engined light transport aircraft designed and produced by the British aircraft manufacturer Airspeed Ltd.

The Envoy originated as a heavier twin-engine derivative of Airspeed's Courier light transport aircraft. Sharing much of its design with this earlier aircraft, it was relatively easy to develop; confidence in the project was so high that within a week of the prototype's maiden flight, it was performing as a display aircraft to the public. Quantity production of the Envoy had been initiated even before this first flight. Early on, Airspeed worked closely with the British engine manufacturer Wolseley Motors as both a key supplier and early custom of the Envoy; development subsequently branched out to a wide variety of engines and configurations.

Airspeed Envoy

The majority of Envoys were produced by Airspeed at their facility at Portsmouth Aerodrome, Hampshire. The type was also produced overseas in Japan by Mitsubishi following the acquisition of a licence at the company's Nagoya factory; it was locally known as the Mitsubishi Hinazuru-type Passenger Transport. While many customers of the Envoy were in the civilian sector, where it was used for a variety of purposes from air racing to operating as an airliner, it also found an audience with military operators. The Convertible Envoy was developed for South Africa, which sought a model that could be rapidly reconfigured between civilian and military duties, being outfitted for use as a light bomber and reconnaissance aircraft for the latter capacity. The Envoy served as the basis for the Airspeed Oxford, a militarised trainer aircraft operated in large numbers by the Allies in and around the Second World War.

Airspeed Envoy

Development

During the early 1930s, Airspeed successfully introduced the innovative Courier, the first British aircraft to feature a retractable undercarriage. Very quickly following the first flight, the company's management recognised that a logical follow-up project would be an enlarged derivative powered by twin engines, involving considerably less design work than an equivalent clean sheet initiative. The design effort was headed by co-founder A. H. (Hessell) Tiltman; during November 1933, Airspeed's board authorised the project to proceed. By January 1934, six aircraft, including the prototype, were at various stages of construction.

Airspeed Envoy

On 26 June 1934, the prototype, G-ACMT, performed its maiden flight, piloted by C. H. A. Colman. One week later, confidence in the prototype was so high that Airspeed decided to dispatch it for its first public appearance, an exhibition by the Society of British Aircraft Constructors (SBAC) at Hendon. By September 1934, the prototype was undergoing airworthiness certification testing at RAF Martlesham Heath. Furthermore, work was progressing well on a specialised racing variant of the aircraft, the Airspeed Viceroy.

Originally, Airspeed worked closely with British engine manufacturer Wolseley Motors on the Envoy; it was originally designed to work with the latter's Wolseley Aries engine. This partnership involved, amongst other aspects, the first two Envoys being sold to Wolseley and its owner Lord Nuffield. The prototype, and several early production aircraft, were powered by Aries engines; however, the prototype was subsequently reengined with the Wolseley Scorpio (amongst other changes) during early 1936.

Wolseley abruptly decided to cease aircraft engine manufacture in September 1936 as a result of the bureaucratic requirements of the Air Ministry being considered excessive by Lord Nuffield. Accordingly, Airspeed decided to adapt the aircraft to work with a variety of different engines. This decision led to customers being offered a choice of various engines to power their aircraft; these powerplants included the Aries, Armstrong Siddeley Cheetah V or Armstrong Siddeley Lynx IVC radial engines.

Early on, Airspeed promoted the Envoy by entering individual aircraft in air races and performing numerous long-distance flights. The specialised Viceroy derivative, being tailored towards racing, was used in this promotional campaign as well. Production of the Envoy was produced in three distinct series; initial production aircraft lacked several of the features present on later-built examples, such as trailing edge flaps. Seventeen Series I Envoys were completed, followed by thirteen Series II aircraft (equipped with split flaps) and the improved Series III, of which nineteen were constructed. Akin to the preceding Courier, a 'colonial' model of the envoy was developed for overseas customers.