The 5‑ton 6x6 truck, officially "Truck, 5-ton, 6x6", was a class of heavy-duty six-wheel drive trucks used by the US Armed Forces. The basic cargo version was designed to transport a 5-ton (4,500 kg) load over all roads and cross-country terrain in all weather. Through three evolutionary series (M39, M809, and M939) there have been component improvements, but all trucks were mechanically very similar. They were the standard heavy-duty truck of the US military for 40 years, until replaced by the Medium Tactical Vehicle (MTV) beginning in 1991.

History

A 20 June 1945 report by the Army Ground Forces Equipment Review Board recommended that all 4‑ton to 6‑ton tactical trucks should be replaced by a single standard 5‑ton (4,536 kg) 6x6 truck series. In 1949 specifications were set and truck manufactures began working on prototypes. Chrysler, GMC, and Mack's designs were advanced, International Harvester's was a conservative conventional, similar in size and layout to the earlier 6-ton (G512) series.

5-ton 6×6 truck

The International Harvester design was chosen and rushed into production in January 1951, it would be standardized as the M39 series. Kaiser (renamed Kaiser-Jeep in 1963) also became a major manufacturer, with Diamond T and Mack building smaller numbers. In 1963 Kaiser-Jeep began building the final order, production was completed in 1965.

5-ton 6×6 truck

In the 1960s more trucks were required, and the Army wanted to replace the multifuel engines with a standard diesel. AM General (successor of Kaiser-Jeep) developed an updated and redesigned version of the M39 series. Standardized as the M809 series, the primary difference was the engine. The hood, frame, and fenders were lengthened to make room for the larger engine, and it had a redesigned grille. All had an air cleaner on the left front fender, a quick visual way to tell them from the earlier M39 series. Jeep/AM General built all M809s between 1969 and 1982.

5-ton 6×6 truck

The M939 series was a Product Improvement Package of the M809, with updated engine, transmission, and brakes. A new, larger cab and tilt-forward hood were a major visual change from earlier trucks. Early M939s were rebuilds of M809 vehicles, suffix –A2 are new production by Bowen-McLaughlin-York/BMY with later model Cummins engine.

Engines

The 5-ton family had five different engines in its life, one gasoline, one multifuel, and three different diesels.

The M39 series had three different engines, all with different operating characteristics. The 1951 design was originally powered by a Continental R6602, a inline 6 cylinder gasoline engine. These models had no external air filter and had the exhaust outlet under the right side of the truck's body. The engine was a successful design but by 1960 its and the use of gasoline as a fuel in heavy trucks were becoming a problem.

In 1962–1963 Diamond T and Mack began retrofitting M52 semi-tractors and M54 cargo trucks to the -A1 standard. They had a Mack ENDT-673, a turbocharged inline 6 cylinder diesel engine. These were the only diesel M39 series models.

The -A2 had the army standard design LDS-465-1 multifuel engine built by Continental. It was a turbocharged inline 6 cylinder multifuel engine. Using M.A.N. technology it was a diesel type that could also use other fuel oils or a gasoline/oil mix in an emergency. Also used by the M35 -ton series this engine was successful in the smaller trucks but was underpowered compared to all other-5-ton models.

The M809 series used a Cummins NHC250 engine, a naturally aspirated inline 6 cylinder diesel engine developing at 2100rpm and of torque at 1500rpm. All models of the M809 series used this engine throughout their service life. The N series was a very successful commercial design, with a conservative rating the engine was more powerful and less stressed than the multifuel engine.

The M939 and M939A1 models were rebuilds of the M809 series and used their NHC 250 engine. Although the design is dated it is still powerful and reliable in service and was not significantly up-graded. The M939A2 new production models use a modern Cummins 6CTA8.3 turbocharged and aftercooled inline 6 cylinder diesel engine. This is also a successful commercial design.

Driveline

The M39 and M809 series had a Spicer 5 speed manual synchromesh transmission. The M939 used an Allison automatic, for better engine speed control and driving ease.