The image is formed at IM, at the focal distance of the lens next the eye, and at the same distance from the field-glass. When distinct vision is the principal object of an achromatic telescope, the two lenses are usually both plano-convex, and fixed with their curved faces towards the object glass, as in the figure. Sometimes, however, they consist of what is called _crossed_ lenses, that is lenses ground on one side to a short focus, and on the other side to a pretty long focus, the sides with the deepest curves being turned towards the object glass. A diaphragm, or aperture of a proper diameter, is placed at the focus of the eye lens, where the image formed by the object-glass falls, for the purpose of cutting off the extreme rays of the field lens, and rendering every part of the field of view equally distinct. This is likewise the form of the eye-piece generally applied to Gregorian reflectors. In short, when accurately constructed, it is applicable to telescopes of every description. This eye-piece, having the image viewed, by the eye behind the inner lens, is generally called the _negative_ eye-piece, and is that which the optical-instrument makers usually supply, of three or four different sizes, for so many magnifying powers, to be applied to different celestial objects, according to their nature or the state of the atmosphere in which they are used.
_Ramsden’s eye-piece._--There is another modification of lenses, known by the name of the _Positive_, or Ramsden’s eye-piece, which is much used in Transit instruments, and telescopes which are furnished with micrometers, and which affords equally good vision as the other eye-piece. In this construction the lenses are plano-convex, and nearly of the same focus, but are placed at a distance from each other less than the focal distance of the glass next the eye, so that the image of the object viewed is beyond both the lenses, when measuring from the eye. The flat faces of the two lenses are turned into contrary directions in this eye-piece--one facing the object-glass, and the other the eye of the observer; and as the image formed at the focus of the object-glass, lies parallel to the flat face of the contiguous lens, every part of the field of view is distinct at the same adjustment, or, as opticians say, there is a _flat field_, which, without a diaphragm, prevents distortion of the object. This eye-piece is represented in fig. 74, where AB and CD are two plano-convex lenses, with their convex sides inwards. They have nearly the same focal length, and are placed at a distance from each other, equal to about two thirds of the focal length of either. The focal length of an equivalent single lens is equal to three fourths the focal length of either lens, supposing them to have equal focal distances. This eye-piece is generally applied, when wires of spider’s lines are used in the common focus; as the piece containing the lenses can be taken out without disturbing the lines, and is adjustable for distinct vision; and whatever may be the measure of any object given by the wire micrometer, at the solar focus, it is not altered by a change of the magnifying power, when a second eye-piece of this construction is substituted.