The Falcon 9 first-stage landing tests were a series of controlled-descent flight tests conducted by SpaceX between 2013 and 2016. Since 2017, the first stage of Falcon 9 missions has been routinely landed if the rocket performance allowed it, and if SpaceX chose to recover the stage.
The program's objective was to reliably execute controlled re-entry, descent and landing (EDL) of the Falcon 9 first stage into Earth's atmosphere after the stage completes the boost phase of an orbital spaceflight. The first tests aimed to touch down vertically in the ocean at zero velocity. Later tests attempted to land the rocket precisely on an autonomous spaceport drone ship (a barge commissioned by SpaceX to provide a stable landing surface at sea) or at Landing Zone 1 (LZ-1), a concrete pad at Cape Canaveral. The first ground landing at LZ-1 succeeded in December 2015, and the first landing at sea on a drone ship in April 2016. The second landed booster, B1021, was the first to fly again in March 2017, and was recovered a second time.
Landings of Falcon 9 first-stage boosters
Overview
The first landing test occurred in September 2013 on the sixth flight of a Falcon 9 and maiden launch of the v1.1 rocket version. From 2013 to 2016, sixteen test flights were conducted, six of which achieved a soft landing and recovery of the booster: flight 20 (Orbcomm OG2 M2) safely touching down on the LZ-1 ground pad upon first attempt in December 2015; flight 23 (CRS-8) finally achieving a stable landing at sea in the Atlantic on the drone ship Of Course I Still Love You in April 2016 after four previous attempts ended in destruction of the booster upon impact; flights 24 (JCSAT-14) and 25 (Thaicom 8) returning at higher speed from GTO missions at sea on a drone ship in May 2016; flight 27 (CRS-9) returning to LZ-1 in July 2016; flight 28 (JCSAT-16) landing on a drone ship in August 2016;
Since the January 2017 return to flight, SpaceX has stopped referring to landing attempts as "experimental", indicating that they have become a routine procedure (see Iridium-1 and CRS-10 press kits of 2017, compared with CRS-9 and JCSAT-16 of 2016). , 14 routine landings have been performed ( success) and three missions were launched in expendable configuration, not attempting to land.
The first-stage descent tests were part of the larger SpaceX reusable launch system development program, which included a large amount of new technology development activities and earlier low-altitude test flights at the SpaceX facility in McGregor, Texas in preparation for the high-altitude high-velocity testing of landing test phase of the program. The overall objective of the program is to privately develop reusable rockets using vertical-landing technology so as to substantially reduce the cost of space access.
Traditionally, the first stages of orbital carrier rockets have been discarded in the ocean once the ascent was complete. Achieving routine recovery and reuse of the launch vehicles could dramatically reduce the cost of access to space.
History
From the beginning, Elon Musk wanted the first stage of SpaceX launch vehicles to be recoverable, and all Falcon 1 launches and the first two Falcon 9 launches had parachutes. However the boosters burned up on reentry, before the parachutes even deployed. This meant a different approach had to be taken. Experimental prototypes were built and flown during 2012 to 2014 to test the idea of propulsive landings and gain experience.
SpaceX first announced in March 2013 that it would instrument and equip subsequent Falcon 9 first stages as controlled-descent test vehicles, able to propulsively decelerate towards a soft touchdown over the water surface. The company expected to begin these flight tests in 2013, with an attempt to return the vehicle to the launch site for a powered landing no earlier than mid-2014.
In the event, SpaceX did perform their first controlled-descent test flight in 2013 but continued the over-water testing well into 2015. Following analysis of telemetry data from the first controlled descent in September 2013, SpaceX announced that a large amount of new technology passed their real-life test objectives, and that coupled with the technology advancements made on the Grasshopper prototype, they were now ready to test the full EDL process to recover the first stage. The rocket was "able to successfully transition from vacuum through hypersonic, through supersonic, through transonic, and light the engines all the way and control the stage all the way through [the atmosphere]".