Many steamboats operated on the Columbia River and its tributaries, in the Pacific Northwest region of North America, from about 1850 to 1981. Major tributaries of the Columbia that formed steamboat routes included the Willamette and Snake rivers. Navigation was impractical between the Snake River and the Canada–US border, due to several rapids, but steamboats also operated along the Wenatchee Reach of the Columbia, in northern Washington, and on the Arrow Lakes of southern British Columbia.

Types of craft

The paddle-wheel steamboat has been described as an economic "invasion craft" which allowed the rapid exploitation of the Oregon Country, a huge area of the North American continent eventually divided between the United States and Canada, and of Alaska and the Yukon. Three basic types of steamboat were used on inland waterways: propeller, side-wheeler, and sternwheeler. Propellers required deeper draft than was commonly available on inland rivers, and side-wheelers required expensive docking facilities. Stern-wheelers were more maneuverable than side-wheelers and could make a landing just about anywhere. For these reasons, the stern-wheeler type was dominant over the propeller and the side-wheeler in almost all inland water routes.

Steamboats of the Columbia River

Economics of operations

Steamboats earned money by charging passengers fares and shippers for carrying cargo. Some vessels managed to carry as many as 500 people together with 500 tons of cargo. Passenger fares varied over time. In the early 1850s, fares for the Eagle, running from Oregon City and Portland, were $5 a trip for passengers and $15 per ton of freight. During a gold rush, passenger fares were $23 for passage from Portland to Wallula, with various other charges, such as meals, in addition. Cargo was charged by the ton and by the distance carried. Sample rates in the early 1860s, following the establishment of a near monopoly on river transit, showed cargo rates running from $15 per ton for the haul from Portland to The Dalles (), and 90 per ton for Portland to Lewiston (501) miles. A ton was not a unit of weight but a unit of volume, with cargo charges based on 40 cubic feet equalling one ton. Various chicaneries were practiced by the steamboat companies to increase the tonnage charges for items shipped. One authority states that gross tonnage was measured at 100 cubic feet to the ton, which would still permit the steamboat companies to fix the "ton" for customer charges at 40 cubic feet.

Steamboats of the Columbia River

Steamboat capacity was measured by tonnage. Gross tonnage was the total volume capacity of the boat, while registered tonnage was the total theoretical volume that could be used to carry cargo or passengers once mechanical, fuel and similar areas had been deducted. For example, the sternwheeler Hassalo, built in 1880, was long, and rated at 462 gross tons and 351 registered tons. Steamboat captains often became wealthy men. In 1858, the owners of the Colonel Wright paid her captain, Leonard Wright, $500 per month, an enormous amount of money for the time.

Steamboats of the Columbia River

Fuel and fuel consumption

Most steamboats burned wood, at an average rate of 4 cords an hour. Areas without much wood, such as the Columbia River east of Hood River, required wood to be hauled in and accumulated at wood lots along the river; eventually provision of fuel wood for steamboats itself became an important economic activity.

Commodities shipped

Timmen reports that in 1867, Portland's exports totaled $6,463,793, of which about $4 million was gold dust and ingots mined from Idaho and Montana mines to be taken to the San Francisco mint. In 1870, the situation was similar. Other commodities hauled included lumber, agricultural products, salted salmon, and livestock. Once gold mines started winding down, the steamboats on the upper Columbia and Snake rivers carried wheat.