HMS Collingwood was a dreadnought battleship built for the Royal Navy in the first decade of the 20th century. She spent her whole career assigned to the Home and Grand Fleets and often served as a flagship. Prince Albert (later King George VI) spent several years aboard the ship before and during World War I. At the Battle of Jutland in May 1916, Collingwood was in the middle of the battleline and lightly damaged a German battlecruiser. Other than that battle, and the inconclusive action of 19 August, her service during the war generally consisted of routine patrols and training in the North Sea. The ship was deemed obsolete after the war; she was reduced to reserve and used as a training ship before being sold for scrap in 1922.
Design and description
The design of the St Vincent class was derived from that of the previous , with a slight increase in size, armour and more powerful guns, among other more minor changes. Collingwood had an overall length of , a beam of , and a normal draught of . She displaced at normal load and at deep load. In 1911 her crew numbered 758 officers and ratings.
Collingwood was powered by two sets of Parsons direct-drive steam turbines, each driving two shafts, using steam from eighteen Yarrow boilers. The turbines were rated at and were intended to give the ship a maximum speed of . During her full-power, eight-hour sea trials on 17 January 1910, she only reached a top speed of from . Collingwood carried enough coal and fuel oil to give her a range of at a cruising speed of .
Armament and armour
The St Vincent class was equipped with ten breech-loading (BL) 12-inch (305 mm) Mk XI guns in five twin-gun turrets, three along the centreline and the remaining two as wing turrets. The secondary, or anti-torpedo boat, armament comprised twenty BL 4-inch (102 mm) Mk VII guns. Two of these guns were each installed on the roofs of the fore and aft centreline turrets and the wing turrets in unshielded mounts, and the other ten were positioned in the superstructure. All guns were in single mounts. The ships were also fitted with three 18-inch (450 mm) torpedo tubes, one on each broadside and the third in the stern.
The St Vincent-class ships had a waterline belt of Krupp cemented armour (KC) that was thick between the fore and aftmost barbettes, reducing to a thickness of before it reached the ships' ends. Above this was a strake of armour thick. Transverse bulkheads inches thick terminated the thickest parts of the waterline and upper armour belts once they reached the outer portions of the endmost barbettes.
The three centreline barbettes were protected by armour thick above the main deck that thinned to below it. The wing barbettes were similar except that they had 10 inches of armour on their outer faces. The gun turrets had faces and sides with roofs. The three armoured decks ranged in thicknesses from . The front and sides of the forward conning tower were protected by 11-inch plates, although the rear and roof were 8 inches and 3 inches thick, respectively.
Alterations
The guns on the forward turret roof were removed in 1911–1912 and the upper forward pair of guns in the superstructure were removed in 1913–1914. In addition, gun shields were fitted to all guns in the superstructure and the bridge structure was enlarged around the base of the forward tripod mast. During the first year of the war, a fire-control director was installed high on the forward tripod mast. Around the same time, the base of the forward superstructure was rebuilt to house eight 4-inch guns and the turret-top guns were removed, which reduced her secondary armament to a total of fourteen guns. In addition, a pair of 3-inch anti-aircraft (AA) guns were added.
By April 1917, Collingwood mounted thirteen 4-inch anti-torpedo boat guns as well as single 4-inch and 3-inch AA guns. Approximately of additional deck armour had been added after the Battle of Jutland. Before the end of the war the AA guns were moved from the deckhouse between the aft turrets to the stern and the stern torpedo tube was removed. In 1918, a high-angle rangefinder was fitted and flying-off platforms were installed on the roofs of the fore and aft turrets.
Construction and career
Collingwood, named after Vice-Admiral Cuthbert Collingwood, was ordered on 26 October 1907. She was laid down at Devonport Royal Dockyard on 3 February 1908, launched on 7 November 1908 and completed in April 1910. Including her armament, the ship's cost is quoted at £1,680,888 or £1,731,640.