The methods of measurement of wood developed still later. Until Oettelt’s time no method of precise determination of volumes was known, everything being estimated by cords or by diameter breast-high and height, or by the number of boards which a tree would make (board feet?).

The diameter was sometimes used as a price maker, the price increasing in direct proportion to the diameter increase. Oettelt calculated the volume of coniferous trees as cones, and _Vierenklee_, who wrote a book on mathematics for the use of foresters, calculated timbers with the top removed by using the average diameter, to which Hennert added the volume of a cone with the difference of the two diameters as a base, to make the total tree volume.

A Brief History of Forestry. — Part 50

Most measurements of standing trees were, of course, made on the circumference, for, in the absence of calipers, the diameter could be directly measured only on the felled tree. Doebel had already measured the height by means of a rectangular triangle, and the first real hypsometer with movable sights was described by Jung in 1781; and a complete instrument, which could be used for measuring both height and diameter at any height, similar to some more modern ones, was constructed by Reinhold.

A Brief History of Forestry. — Part 50

Determination of the real wood contents in a cord of wood and of the volume of bark by measurement was taught by Oettelt, and the method of immersion in water and measuring the displaced volume, by Hennert (1782).

A Brief History of Forestry. — Part 50

In 1785, Krohne first called attention to the variation of the increment in different age classes and the need of determining the accretion for each separately.

In 1789, Trunk taught how to determine average felling age increment, and also the method of determining the change of diameter classes, which is now used by the United States Forest Service: “On good soil a tree grows one inch in three years, on medium soil in four years, on poor soil in five years.” With this knowledge, the attainment of a given diameter, or the change from one diameter or age class to the next could be calculated.

Volume tables were at Trunk’s command, and Paulsen in 1787, Kregting in 1788, mention periodic yield tables; but generally speaking “ocular taxation” or estimating was the rule, checked by experience in actual fellings, the method of the American timber looker. Generally, of course, only the log timber was estimated as with us, and only the very roughest estimating or rather guessing was in vogue until near the end of the period.