Another reason applies only if you have a large IDE disk drive and are using neither LBA addressing nor overlay drivers[5]. In this case, you will have to put the root partition into the first 1,024 cylinders of your hard drive, usually around 524 megabytes. See section 2.3.3 on page [*] for more information on this issue.
[5] See your hard drive manual for a description of these features.
Most people feel that a swap partition is also a necessity, although this isn’t strictly true. “Swap” is scratch space for an operating system, which allows the system to use disk storage as “virtual memory” in addition to physical memory. Putting swap on a separate partition allows Linux to make much more efficient use of it. It is possible to force Linux to use a regular file as swap, but this is not recommended.
The only real drawback to using more partitions is that it is often difficult to know in advance what your needs will be. If you make a partition too small, either you will have to reinstall the system, or you will be constantly moving things around to make room in the undersized partition. On the other hand, if you make the partition too big, you may be wasting space that could be used elsewhere.
Disk space requirements and your partitioning scheme are influenced by the type of installation you decide to create.
For your convenience, Debian offers a number of default “profiles” some of which are listed later in this section. Profiles are simply preselected sets of packages designed to provide certain desired capabilities on your system. Installation is easier since packages that fit your desired profile are automatically marked for installation. Each given profile lists the size of the resulting system after installation is complete. Even if you don’t use these profiles, this discussion is important for planning, since it will give you a sense of how large your partition or partitions need to be. The following are some of the available profiles and their sizes:
Server_std. This is a small server profile, useful for a stripped-down server, that does not have a lot of niceties for shell users. It basically has an FTP server, a web server, DNS, NIS, and POP. It will take up around 50MB. Of course, this is just the size of the software; any data you serve would be additional.