OVPsim is a multiprocessor platform emulator (often called a full-system simulator) used to run unchanged production binaries of the target hardware. It has public APIs allowing users to create their own processor, peripheral and platform models. Various models are available as open source. OVPsim is a key component of the Open Virtual Platforms initiative (OVP), an organization created to promote the use of open virtual platforms for embedded software development. OVPsim requires OVP registration to download.
Licensing
OVPsim is developed and maintained by Imperas. The core simulation platform is proprietary software; it is available free of charge for non-commercial usage. Commercial usage requires a low-cost license from Imperas to cover maintenance. Various processor, peripheral and platform models are available as free software under the Apache License version 2.0.
Details
There are three main components of OVP: open-source models, fast OVPsim simulator, and modeling APIs. These components are designed to make it easy to assemble multi-core heterogeneous or homogeneous platforms with complex memory hierarchies, cache systems and layers of embedded software that can run at hundreds of MIPS on standard desktop PCs. OVPSim is considered instruction accurate, but not cycle-accurate. There are many examples of components, and complete virtual platforms that can boot a Linux Kernel in under 5 seconds at OVP Homepage.
Open source models
Within OVP there are several different model categories. These models are provided as both pre-compiled object code, and as in some cases, source files. OVPsim no longer supplies source code for the ARM and MIPS processor models. Currently there are processor models of ARM (processors using the ARMv4, ARMv5, ARMv6, ARMv7, ARMv8 instruction sets) up to the ARM Cortex-A72MPx4 (and including multi-cluster ARMv8 models with GICv3), Imagination MIPS (processors using MIPS32, MIPS64, microMIPS, nanoMIPS and MIPS R6 instruction sets) up to the microAptiv, interAptiv, proAptiv, and Warrior cores, Synopsys Virage ARC600/ARC700 and ARC EM series, Renesas v850, RH850, RL78 and m16c, PowerPC, Altera Nios II, Xilinx MicroBlaze, RISC-V (models using 32bit RV32I, RV32M, RV32IM, RV32A, RV32IMA, RV32IMAC, RV32F, RV32D, RV32E, RV32EC, RV32C, RV32G, RV32GC, RV32GCN, RV32IMAFD and 64bit RV64I, RV64M, RV64IMAC, RV64F, RV64D, RV64C, RV64G, RV64GC, RV64GCN, RV64IMAFD ISA subsets), Andes Technology N25/NX25, N25F/NX25F, A25/AX25, A25F/AX25F, Microsemi CoreRISCV/MiV-RV32IMA, SiFive E31, E51, U54, U54-MC, Freedom U540, Codasip Series 1, 3, 5, 7 RISC-V cores, Intel NiosV RISC-V core, Texas Instruments TMS320 DSP, and OpenRisc families. The OpenHW Group uses OVPsim as the golden reference for their open source RISC-V CV32E40 and CV32E20 cores. There are also models of many different types of system components including RAM, ROM, cache, and bridge. There are peripheral models such as Ethernet MAC, USB, DMA, UART, and FIFO. Several different pre-built platforms are available, including the most common operating systems ucLinux, Linux, Android, FreeRTOS, Nucleus, Micrium.
One of the main uses of the OVP simulation infrastructure is the ability to create and simulate custom built models—either from scratch, or by using one of the open source models as a starting point. The OVP APIs are tailored to different model types: processors, behavioral models of peripherals, and platforms. There are over 100 source model variants available to download.
OVPsim simulator
The OVPsim simulator is available as an OVP reference and is free for non-commercial usage. The simulator uses dynamic binary translation technology to achieve very high simulation speeds. More than a billion simulated instructions per second is possible, in some cases on regular desktop PC machines. OVPsim is available for x86 Windows and Linux hosts.
OVPsim comes with a GDB RSP (Remote Serial Protocol) interface to allow applications running on simulated processors to be debugged with any standard debugger that supports this GDB RSP interface. OVPsim comes with the Imperas iGui Graphical Debugger and also an Eclipse IDE and CDT interface.
OVPsim can be encapsulated and called from within other simulation environments and comes as standard with interface files for C, C++, and SystemC. OVPsim includes native SystemC TLM2.0 interface files. It is also possible to encapsulate legacy models of processors and behavioral models so that they can be used by OVPsim.
Modeling APIs
OVP models are created using C/C++ APIs. There are three main APIs: OP, VMI, BHM/PPM.