Captain Tyler concludes his report to the Board of Trade as follows:—
“As the results of my observations and experiments, I have to report, in conclusion, that this scheme for crossing the Mont Cenis is, in my opinion, practicable, both mechanically and commercially, and that the passage of the mountain may thus be effected, not only with greater speed, certainty, and convenience, but also with greater safety than under the present arrangements. Few would, in the first instance, either contemplate or witness experiments upon such steep gradients and round such sharp curves on the mountain side, without a feeling that much extra risk must be incurred and that the consequences of a fractured coupling or a broken tire, or a vehicle leaving the rails, would on such a line be considerably aggravated.
“But there is an element of safety in this system of locomotive working which no other railway possesses.
“The middle rail not only enables the engine to surmount, and to draw its train up these gradients, but also affords a means of applying any required amount of extra brake power for checking the speed, or for stopping any detached vehicles during the descent, and it further acts by the use of horizontal guiding wheels on the different vehicles as a most perfect safeguard, to prevent engines, carriages or waggons from leaving the rails, in consequence either of defects in the bearing rails or of failure in any part of the rolling stock. The safest portions of the proposed railway ought indeed, under proper management, to be those on which, the gradients being steeper than 1 in 25, the middle rail will be employed.
“There is no difficulty in so applying and securing that middle rail, and making it virtually one continuous bar, as to preclude the possibility of accident from its weakness or from the failure of its fastenings, and the only question to my mind is whether it would not be desirable still further to extend its application to gradients less steep than 1 in 25. It would apparently be advantageous to do so, not only for the sake of obtaining increased adhesion with less proportional weight, and therefore economical traction, but also with a view to greater security, especially on curved portions of the line.”