1806.—ELIHU WHITE. A machine for casting types; consisting of a matrix-box containing a certain number of matrices, which is applied to a complex mould having a similar number of apertures, through which the metal is poured, thus forming several types at one operation.

1807.—ANTHONY FRANCIS BERTE. Improvements on his former patent. The metal is forced through the aperture by means of a plug or piston, and the machine is so contrived as to regulate the quantity of metal ejected at each application of the mould.

A History of the Old English Letter Foundries — Part 93

Another improvement consists of making the body of the mould in four adjustable pieces instead of two, which will admit of changes in the body, as well as the thickness of the types. The moulds are without nicks,[197] and the type, when cast, is expelled by a punch or other tool, without opening the mould.

A History of the Old English Letter Foundries — Part 93

1809.—JOHN PEEK. A machine for the more expeditious casting of types, by which three motions out of the five ordinarily made use of in casting, are saved. This consists in the addition of two parts to the ordinary hand-mould; that to the upper part being a plate with a socket in which the matrix is suspended on pivots, and that to the lower part being a bolt which presses the matrix to the mould, where it is kept by a spiral spring round the bolt, and by the withdrawal of which the matrix is tilted, another spiral spring keeping it in that position till the mould recloses. The bolt is worked by a lever.[198]

A History of the Old English Letter Foundries — Part 93

1812.—WILLIAM CASLON. An improved printing type. The face or letter part of the type is made of the usual thickness, and in the usual way, “but the body, which is commonly made about seven-eighths of an inch, I make only three-sixteenths of an inch in thickness; and the front of the said body I make sloping or bevelling upwards from the outer side towards the face, as well as the opposite side or back, by which means the upper part of the body is about one-eighth of an inch narrower than the under part of the same.” These short types are raised to the requisite height to paper by stands of the necessary thickness. “Or the body may, without being bevelled, be fixed by nails or otherwise, upon blocks of wood of a proper width and height. Or the stands may be made of the whole width of the body of the type, with only one projecting part, the other being screwed on after the types are put on the stands. The advantage of these types is in economy of weight and space; the former being one-half, and the latter one-third to one-half of the ordinary types.”