PRIMING FOR IRON.--The usual plan is to use red lead mixed with linseed oil, the proportion required being about 14lbs. of linseed oil to every cwt. of lead. The second coat should be equal proportions of red and white lead mixed to a proper consistency with linseed oil. Sometimes oxide of iron paint is used instead of red lead.

PAINTING ON STUCCO.--The priming must contain a considerable quantity of oil, because of the absorbent nature of the stucco, and it should have a big proportion also of turpentine. Four galls. of boiled oil to a cwt. of red lead and three quarts of turpentine will usually answer. The second coat should be an equal mixture of red and white lead with a smaller proportion of turpentine and oil.

Paint & Colour Mixing — Part 7

PRIMING FOR DEAL OR PINE (INSIDE).--With white lead use three-quarter ounces of driers and the same quantity of red lead to every pound of lead. Thin with about the same proportion of turps and raw linseed oil.

Paint & Colour Mixing — Part 7

SECOND COAT (INSIDE).--Use about half-an-ounce of driers and one ounce of red lead to every pound of white lead.

Paint & Colour Mixing — Part 7

SECOND COAT (OUTSIDE).--Use about one ounce of patent driers to every pound of white lead, with the addition of about the same quantity of red lead.

EGG SHELL GLOSS.--To every pound of white lead add quarter of an ounce of copal varnish and the same quantity of gold size with half the quantity of boiled oil. These will serve the purpose of binding the materials together and causing them to dry. The thinners should consist of turpentine used in the proportion of about three-quarters of a pint to every 7 lbs. of white lead.

COLOURS OR STAINERS.--We have thus far omitted to take into consideration the colours--or stainers, as most painters call them--that have to be used in the mixtures given in the last chapter, excepting, of course, when a white paint is required.

As a rule, one or several colours are added to the base producing a tint, shade, or hue, as may be required. Sometimes, but not often, colours are employed as “body colours,” that is, they are employed just as they are purchased, ground in oil, excepting that they are thinned down with the requisite quantity of oil and turpentine.

We may now give consideration to actual colour mixture, but must first make one or two points clear, so that the lists which follow may be properly understood.