The Soundart Chameleon was a hardware synthesizer module, designed by the Spanish company Soundart. The name Chameleon comes from the fact that the machine was able to change its "skins", which are different sound engines. The Chameleons were produced from 2002 to 2004, until the company went bankrupt.
Internal structure
The Chameleon was built around two processors: a 24-bit fixed point Motorola DSP56303 Digital Signal Processor, clocked at 100 MHz a 32-bit ColdFire microcontroller (model MCF5206), clocked at 40 MHz
Each processor has its own dedicated DRAM (4MWords) for the DSP, 8MB for the microcontroller). The system stores the operating system (RTEMS), the firmware for the microcontroller and the DSP code into a 1MB Flash.
When the Chameleon starts, the ColdFire boots the RTOS and its own application from the Flash. It then loads the DSP using the DSP HPI (Host Port Interface).
The microcontroller communicates with its environment using two serial ports. The first serial port is connected to the MIDI interface. The second serial port is connected to the front panel circuit board. The front panel has its own microcontroller, used to control the LCD and the various push-buttons, knobs and potentiometers on the front panel.
The RS-232 debug port located at the back is used to upload new "skins" in the Chameleon, from the development environment running on a PC. The debug port is connected to the front panel board which acts as a bridge with the Chameleon main board.
Open software architecture
The Chameleon was designed since the beginning as a completely open architecture system. A complete access was given to the two processors. Writing a "skin" requires then to write two programs: the DSP program (written normally in assembly), for the real-time audio processing, the microcontroller program (written normally in C), for the MIDI, control rate processing and user interface tasks
To simplify system integration, the Chameleon runs on RTEMS real-time operating system. The whole MIDI communication is handled by the MIDIShare library.
The Chameleon Development Kit contained all the software tools required to write a complete skin: the Motorola Suite56 DSP tools for the DSP the GNU C compiler for the ColdFire the Chameleon Development environment (CDE) the Chameleon Toolkit
A "skin" had to be written using the two first tools, the CDE acting an Integrated Development Environment (the CDE was in charge of calling the required tools depending on the file to generate)
Once the "skin" had been generated by the CDE, the Chameleon Toolkit was used to upload the different files within the Chameleon hardware through the RS-232 port.
The tool package also included all required libraries to interface with RTEMS, MIDIShare, DSP communication libraries, etc.
Although the development environment was considered as highly professional and facilitating as much as possible the design of "skins", the Chameleon remained a machine that required knowledge in multiple domains (MIDI, digital signal processing, real-time operating system, etc.).
Even if the Chameleon was designed to allow any user to create its own "skin", the vast majority of them were made by Soundart programmers only, and only a few skins were made by users (a noticeable one being the Monowave, written by English programmer Paul Maddox). Most users were expecting more skins to be available, with caught almost all resources from Soundart, leading the company in turn to bankrupt as it could not face the related costs.
Chameleon MkII
In July 2004, Soundart announced that a new version of Chameleon was being designed. This new version, called Chameleon mkII, provided a lot of enhancements compared to the first model: 4 analog audio inputs (2 for the first version) 6 analog audio outputs (2 for the first version) more powerful DSP S/P-DIF digital audio interface one input can be switched to microphone input Flash card slot to store skins and sounds USB interface to replace the RS-232 interface Internal power supply
New soundskins dedicated to mkII were also announced (SID emulator, electric piano, Phase Distortion synthesizer, etc.) but they were never presented.
The Chameleon mkII was announced to be available in 2005, but it never came into production, as the company went bankrupt before. It is assumed that the mkII never existed physically, even in term of prototype, since no photos of the machine could ever be seen. Only a computer rendered image exists of this machine.