Cray XMT (Cray eXtreme MultiThreading, codenamed Eldorado) is a scalable multithreaded shared memory supercomputer architecture by Cray, based on the third generation of the Tera MTA architecture, targeted at large graph problems (e.g. semantic databases, big data, pattern matching). Presented in 2005, it supersedes the earlier unsuccessful Cray MTA-2. It uses the Threadstorm3 CPUs inside Cray XT3 blades. Designed to make use of commodity parts and existing subsystems for other commercial systems, it alleviated the shortcomings of Cray MTA-2's high cost of fully custom manufacture and support. It brought various substantial improvements over Cray MTA-2, most notably nearly tripling the peak performance, and vastly increased maximum CPU count to 8,192 and maximum memory to 128 TB, with a data TLB of maximal 512 TB.

Cray XMT uses a scrambled content-addressable memory model on DDR1 ECC modules to implicitly load-balance memory access across the whole shared global address space of the system. Use of 4 additional Extended Memory Semantics bits (full/empty, forwarding and 2 trap bits) per 64-bit memory word enables lightweight, fine-grained synchronization on all memory. There are no hardware interrupts and hardware threads are allocated by an instruction, not the OS.

Cray XMT

Front-end (login, I/O, and other service nodes, utilizing AMD Opteron processors and running SLES Linux) and back-end (compute nodes, utilizing Threadstorm3 processors and running MTK, a simple BSD Unix-based microkernel) communicate through the LUC (Lightweight User Communication) interface, a RPC-style bidirectional client/server interface.

Cray XMT

Threadstorm3

Threadstorm3 (referred to as "MT processor" and Threadstorm before XMT2) is a 64-bit single-core VLIW barrel processor (compatible with 940-pin Socket 940 used by AMD Opteron processors) with 128 hardware streams, onto each a software thread can be mapped (effectively creating 128 hardware threads per CPU), running at 500 MHz and using the MTA instruction set or a superset of it. It has a 128KB, 4-way associative data buffer. Each Threadstorm3 has 128 separate register sets and program counters (one per each stream), which are fairly fully context-switched at each cycle. Its estimated peak performance is 1.5 GFLOPS. It has 3 functional units (memory, fused multiply-add and control), which receive operations from the same MTA instruction and operate within the same cycle. Each stream has 32 general-purpose registers, 8 target registers and a status word, containing the program counter. High-level control of job allocation across threads is not possible. Due to the MTA's pipeline length of 21, each stream is selected to execute instructions again no prior than 21 cycles later. The TDP of the processor package is 30 W.

Cray XMT

Due to their thread-level context switch at each cycle, performance of Threadstorm CPUs is not constrained by memory access time. In a simplified model, at each clock cycle an instruction from one of the threads is executed and another memory request is queued with the understanding that by the time the next round of execution is ready the requested data has arrived. This is contrary to many conventional architectures which stall on memory access. The architecture excels in data walking schemes where subsequent memory access cannot be easily predicted and thus wouldn't be well suited to a conventional cache model. Threadstorm's principal architect was Burton J. Smith.

Cray XMT2

Cray XMT2 (also "next-generation XMT" or simply XMT) is a scalable multithreaded shared memory supercomputer by Cray, based on the fourth generation of the Tera MTA architecture. Presented in 2011, it supersedes Cray XMT, which had issues with memory hotspots. It uses Threadstorm4 CPUs inside Cray XT5 blades and increases memory capacity eightfold to 512 TB and memory bandwidth trifold (300 MHz instead 200 MHz) compared to XMT by using twice the memory modules per node and DDR2. It introduces the Node Pair Link inter-Threadstorm connect, as well as memory-only nodes, with Threadstorm4 packages having their CPU and HyperTransport 1.x components disabled. The underlying scrambled content-addressable memory model has been inherited from XMT. XMT2 uses 2 additional EMS bits (full/empty and extended) instead of 4 as in XMT.