There are many practical applications for solar panels or photovoltaics. From the fields of the agricultural industry as a power source for irrigation to its usage in remote health care facilities to refrigerate medical supplies. Other applications include power generation at various scales and attempts to integrate them into homes and public infrastructure. PV modules are used in photovoltaic systems and include a large variety of electrical devices.
Infrastructure
Rooftop and building integrated systems
Photovoltaic arrays are often associated with buildings: either integrated into them, mounted on them or mounted nearby on the ground. Rooftop PV systems are most often retrofitted into existing buildings, usually mounted on top of the existing roof structure or on the existing walls. Alternatively, an array can be located separately from the building but connected by cable to supply power for the building. Building-integrated photovoltaics (BIPV) are increasingly incorporated into the roof or walls of new domestic and industrial buildings as a principal or ancillary source of electrical power. Roof tiles with integrated PV cells are sometimes used as well. Provided there is an open gap in which air can circulate, rooftop mounted solar panels can provide a passive cooling effect on buildings during the day and also keep accumulated heat in at night. Typically, residential rooftop systems have small capacities of around 5–10 kW, while commercial rooftop systems often amount to several hundreds of kilowatts. Although rooftop systems are much smaller than ground-mounted utility-scale power plants, they account for most of the worldwide installed capacity.
Indoor Photovoltaics (IPV) Indoor photovoltaics have the potential to supply power to the Internet of Things, such as smart sensors and communication devices, providing a solution to the battery limitations such as power consumption, toxicity, and maintenance. Ambient indoor lighting, such as LEDs and fluorescent lights, emit enough radiation to power small electronic devices or devices with low-power demand. In these applications, indoor photovoltaics will be able to improve reliability and increase lifetimes of wireless networks, especially important with the significant number of wireless sensors that will be installed in the coming years.
Due to the lack of access to solar radiation, the intensity of energy harvested by indoor photovoltaics is usually three orders of magnitude smaller than sunlight, which will affect the efficiencies of the photovoltaic cells. The optimal band gap for indoor light harvesting is around 1.9-2 eV, compared to the optimum of 1.4 eV for outdoor light harvesting. The increase in optimal band gap also results in a larger open-circuit voltage (VOC), which affects the efficiency as well. Silicon photovoltaics, the most common type of photovoltaic cell in the market, is only able to reach an efficiency of around 8% when harvesting ambient indoor light, compared to its 26% efficiency in sunlight. One possible alternative is to use amorphous silicon, a-Si, as it has a wider band gap of 1.6 eV compared to its crystalline counterpart, causing it to be more suitable to capture the indoor light spectra.
Other promising materials and technologies for indoor photovoltaics include thin-film materials, III-V light harvesters, organic photovoltaics (OPV), dye-sensitized solar cells and perovskite solar cells.