The Verizon Droid Razr (GSM/UMTS version: Motorola Razr; both versions styled RAZR) is an Android-based, 4G LTE-capable smartphone designed by Motorola that launched on Verizon Wireless on November 11, 2011. It was announced on October 18, 2011 in New York City.
At launch, the Razr was the thinnest smartphone in the world at only 7.1 mm thick on most of the device (it does, however, have a "bump" on top that is approximately 11.1 mm thick.) and includes a super active-matrix organic light emitting diode (AMOLED) advanced PenTile display, covered in a Gorilla glass screen and a Kevlar back plate. It is powered by an OMAP 4430 SoC with dual 1.2 GHz ARM Cortex-A9 processor cores. Its 8-megapixel rear-facing camera can record 1080p HD videos. It comes with 1 GB of RAM and runs Android version 4.1.2. The Razr Maxx is a variant with a higher capacity battery at 3300 mAh an 85% increase in capacity over the 1780 mAh battery in the original RAZR. Due to the battery's larger physical size, the Razr Maxx's overall thickness is larger, at 8.99 mm.
The Razr's successor, the Droid Razr HD, was announced on 5 September 2012.
Availability
The phone was launched in the United States on November 11, 2011, at 11:11am.
The GSM/UMTS version was launched in India on 21 November 2011 at an MRP of 35,000. Motorola also stated a best buy price in selected retail stores of 33,990 for Razr XT910.
In Australia, Motorola launched it with the network operator Optus in Sydney, on 27 October 2011. But this is not 4G LTE variant.
In Europe it was launched first in Bulgaria, debuting on December 12, 2011 from VIVACOM.
Hardware
Motorola Droid Razr comes in the form factor of a slate with a diamond-cut aluminum chassis. The display is a 4.3 inch qHD (540 × 960) Super AMOLED Advanced PenTile[2] capacitive touchscreen that is covered by scratch-resistant Corning Gorilla Glass with an oleophobic fingerprint-resistant coating.
The back cover is made with DuPont Kevlar fiber surrounded by a plastic structure. The internals of the Droid RAZR are packed the smartphone construction technique Component Lamination, which physically bonds each layer of components to each other to provide a stronger body. The whole phone is covered by an invisible layer of splash-proof nano coating, which makes the phone water-resistant to occasional liquid splashes.
The Droid Razr features four touch-capacitive buttons with the respective functions of menu, home, back and search. It uses a dual microphone system for noise reduction.
A glitch where the time of the phone resets when it powers off had been observed in about two thousand phones worldwide.
Software
The phone comes installed with Android version 2.3.6 Gingerbread. It uses a modified user interface called Motoblur that focuses on social networking. The main features of Motoblur in the Droid Razr are:
Unified contacts. The contacts from all services are unified and duplicates are removed. This is often a source of errors as it has troubles distinguishing between unique contacts and copies. Google apps. By default all the Google Apps present in the Stock Android are included, with a modified UI and with Motorola services embedded. Smartactions. A Motorola app designed to automate tasks based on a wide range of triggers such as; time, location, battery charge, Wi-Fi network, etc. Webtop
The Droid Razr is upgradeable to version 4.1.2 Jelly Bean. The release of the update began on March 8, 2013 for Verizon Wireless Users. The official Over the Air (OTA) update was released soon after.
The Droid Razr has official support from the LineageOS project, the latest available version being 14.1, which is based on Android 7.1.2.
Webtop
Similar to the Motorola Atrix 4G, it has the integrated "Webtop" application from Motorola. The Webtop application is launched when the phone is connected to the external display through the Laptop dock or HD multimedia dock. In Webtop mode, offering a similar user interface of a typical Ubuntu desktop, the phone can run several applications on an external display such as the Firefox web browser, SNS clients and 'mobile view' applications enabling total access of Atrix and its screen. In September 2011, Motorola released the source code of the Webtop application at SourceForge.
Webtop 3.0
With the Ice Cream Sandwich upgrade, Webtop is now called Webtop 3.0 and no longer consists of a separate Linux OS. Instead, when the phone is connected to an external monitor via HDMI (Laptop dock or multimedia dock is no longer required) and Webtop is chosen, the phone switches to the tablet UI in ICS and is able to run all the existing applications on the phone.