An order for 250 of the 4.7-inch carriages was placed with the Walter Scott Co., at Plainfield, N. J., July 12, 1917, upon the recommendation of committees of the Council of National Defense, who were assisting the Ordnance Department in the selection of industrial firms willing to accept artillery contracts. Of the 250 ordered from this concern, 49 were delivered up to the signing of the armistice.
The Rock Island Arsenal had also been employed previously in turning out 4.7-inch carriages; and the capacity of that plant, although small, was utilized. Under the date of July 23, 1917, the arsenal was instructed to deliver 183 carriages. Late in December, 1917, the Studebaker Corporation was given an order for 500. On September 30, 1918, Rock Island Arsenal was given an additional order for 120 carriages, while the Studebaker order was reduced to 380. Additional plant facilities had to be provided at both the Walter Scott Co. and the Studebaker Corporation.
Up to December 12, 1918, a total of 381 carriages of the 4.7-inch type had been completed and delivered. These carriages included the recoil mechanism. In the month of October, 1918, alone, 113 were produced, and this rate would have been continued had the armistice not been signed.
Cannon for the 4.7-inch units were turned out at the Watervliet Arsenal and the Northwestern Ordnance Co., Madison, Wis. Deliveries from the Watervliet Arsenal began in June, 1918, totaling 120 up to December, while the Northwestern Ordnance Co., starting its deliveries in August, had completed 98 by December.
Up to the 15th of November, 64 complete 4.7-inch units had been floated for our forces overseas.
Forgings for the 4.7-inch gun cannon were made by the Bethlehem Steel Co. and the Heppenstall Forge & Knife Co., of Pittsburgh, Pa.
Owing to the great difference in cross section between muzzle and breech end of the jacket, great difficulty was experienced in the heat treatment of these forgings, particularly on the part of manufacturers who had had no previous experience in the production of gun forgings.
[Illustration: FRONT AND REAR VIEWS OF OUR 4.7-INCH GUN AND CARRIAGE, MODEL 1906, WITH WHICH OUR TROOPS HAVE BEEN EQUIPPED FOR A LONG TIME.