A V16 engine is a sixteen-cylinder piston engine where two banks of eight cylinders are arranged in a V configuration around a common crankshaft. V16 engines are less common than engines with fewer cylinders, such as V8 and V12 engines. Each bank of a V16 engine can be thought of as a straight-8, a design that can be inherently balanced. Most V16 engines have a 45° bank angle.

The first use of a V16 engine was in the 1910 Antoinette VII experimental aircraft, followed by several cars in the 1930s. Today, the most common applications for V16 engines are railroad locomotives, marine craft, and stationary power generators.

V16 engine

Automotive applications

Production cars

The first production car to use a V16 engine was the Cadillac V-16, introduced in January 1930. The Cadillac V16 engine was initially produced with a displacement of , OHV and a V-angle of 45 degrees. For the 1938 Series 90, the engine was revised to a displacement of , a flathead valvetrain and a V-angle of 135 degrees (the latter in order to achieve a lower cowl height). This 431 cu. in. version produced as much power as its immediate predecessor while being far less complex, had a stiffer crankshaft that aided durability and smoothness, and even had an external oil filter, a rarity for any car at any price in those days.

V16 engine

The Marmon Motor Car Company actually began development of a V16 engine in 1927 (earlier than Cadillac). Its development program took longer, however, and the Marmon Sixteen was released in 1931. This engine had a V-angle of 45 degrees, used pressed steel cylinder liners and was constructed mostly of aluminium. Only 400 Marmon Sixteens were produced between 1931 and 1933.

V16 engine

In 1991, the Cizeta-Moroder V16T began production, featuring a 16-cylinder engine in a unique configuration. Rather than a conventional V16 layout, the engine was actually two separate transversely mounted V8 engines with gearing between the two providing a single output from the centre of the engine assembly to the transmission. Only a few cars were produced before the company ceased operations.

Prototype cars

The Peerless Motor Company developed a V16 engine in the early 1930s, yet just a single prototype was built before all automobile production ceased and the company converted its factory into a brewery following the end of Prohibition in the United States.

In the late 1980s, the BMW Goldfish V16 engine was developed, based on BMW's then-new V12 engine. Prototypes were fitted to a long-wheelbase 7 Series and then in the early 1990s to a Bentley Mulsanne. At around the same time, Mercedes-Benz developed a V16 engine for the S-class limousine. Between 1988 and 1990, approximately 35 prototypes were built.

The 2003 Cadillac Sixteen concept car was unveiled with a V16 engine, which was based on the General Motors LS V8 engines. The following year, the Rolls-Royce 100EX concept car was unveiled with a V16 engine. The car featured in the film Johnny English Reborn is powered by this V16 engine.

The 2017 Devel Sixteen Prototype used a quad-turbo V16 engine.

Racing cars

The first known use of a V16 in motor racing was the Maserati Tipo V4 car used in Grand Prix racing. The Tipo V4 debuted at Monza in 1929 and achieved a world speed record of at an event in Cremona, Italy.

At the 1931 Indianapolis 500, a custom-built V16 engine was fitted to a Cord "supercar" driven by Shorty Cantlon. The car was competitive, charging from 26th on the grid to 3rd, but was slowed by unreliability, further exacerbated by having to change all sixteen spark plugs. The following year, Bryan Saulpaugh qualified the car in third position. The car suffered a broken oil line on lap 55 and their race was over. Shortly after the race the V16 was removed and replaced with a conventional Miller four-cylinder engine.

The mid-engined Auto Union Type A, Type B and Type C Grand Prix cars of 1933 to 1938 were powered by supercharged engines. Due to a rule change in 1938, these were replaced by a V12 engine for the Type D racing car. Prior to this rule change, the Alfa Romeo Tipo 316 competed at the 1938 Tripoli Grand Prix powered by a 60-degree V16 engine.

The only known use of a V16 engine in the post-World War II era is the British Racing Motors (BRM) V16 engine used in Formula One racing from 1950 to 1955. The engine was a supercharged design, which was unsuccessful despite its high power output. Officially, it produced but probably delivered around . The car was difficult to drive, due to the power band being in a narrow range and at high RPM.