The first-generation Chevrolet Camaro is an American muscle car introduced by Chevrolet in the fall of 1966 for the 1967 model year. It rode on a brand-new rear wheel drive GM F-body platform and was available as a 2-door, 2+2 seat, hardtop, and convertible. The F-body was shared with the Pontiac Firebird for all generations. A 230 cu in Chevrolet straight-6 was standard, with several Chevy V8s available as options. The first-generation Camaro was built through the 1969 model year.
Almost all of 1967–1969 Camaros were built in the two U.S. assembly plants: Norwood, Ohio and Van Nuys, California. There were also five non-U.S. Camaro assembly plants in countries that required local assembly and content. These plants were located in the Philippines, Belgium, Switzerland, Venezuela, and Peru.
Options
The Camaro's standard drivetrain was either a straight-6 engine rated at at 4400 rpm and of torque at 1600 rpm; or a and (in January 1969) V8s, with a standard three-speed manual transmission. There were 8 (in 1967), 10 (in 1968), and 12 (in 1969) different engines available in 1967-1969 Camaros. There were several optional transmissions. A four-speed manual was available with any engine. The two-speed "Powerglide" automatic transmission was available all three years. The three-speed "Turbo Hydra-Matic 350" automatic became available starting in 1968. The optional automatic for SS 396 cars was the Turbo 400 three-speed automatic. A semi-automatic "Torque-Drive" two-speed transmission was available on six-cylinder models.
There were a plethora of other options available all three years, including three main packages:
The RS was an appearance package that included hidden headlights (the doors of which slid horizontally behind the grille when opened), revised taillights with back-up lights under the rear bumper, RS badging, and exterior bright trim. It was available on any model.
The SS performance package consisted of a or V8s and chassis upgrades for better handling and to deal with the additional power. The SS featured non-functional air inlets on the hood, special striping, and SS badging.
The Z/28 performance package was designed (with further modifications) to compete in the SCCA Trans-Am Series. It included a solid-lifter V8, 4-speed transmission, power disc brakes, and two wide "skunk" stripes down the hood and trunk lid.
The idea of offering a wide variety of packages and numerous options was to "blanket" Camaro's end of the personal car market segment with everything from an entry-level 6-cylinder engine to high-performance V8 engines.
1967
The body style for the 1967 Camaro was designed by the same team that designed the new 1965 edition of the Corvair. The Camaro shared the subframe / semi-unibody design with the 1968 Chevy II Nova. Almost 80 factory-installed and 40 dealer options, including three main trim packages, were available: the RS, the SS, and the Z/28.
The SS included a producing at 4800 rpm and at 3200 rpm of torque; and the L35 and L78 big-block V8 engines producing or at 5600 rpm and at 3600 rpm of torque were available. The SS featured non-functional air inlets on the hood, special striping, and SS badging on the grille, front fenders, gas cap, and horn button. It was possible to order both the SS and RS options, making it a RS/SS. In 1967, a Camaro RS/SS convertible with a 396 engine paced the Indianapolis 500.
Z/28
The Z/28 option code was introduced in December 1966 for the 1967 model year. It was the brainchild of Vince Piggins, who conceived offering "virtually race-ready" Camaros for sale from any Chevrolet dealer. This option package was not mentioned in any sales literature, so it was unknown to most buyers. The Z/28 option featured a high-output small-block V8 that had been designed for racing in the 5 litre (305 cu in) class in the then very popular Trans-Am racing series. In 1969, it was intended as a head-to-head competitor for the Ford Boss 302 Mustang. It had a stroke crankshaft with bore, an aluminum intake manifold, and a 4-barrel vacuum secondary 780 cfm Holley carburetor.
Advertised power of the 302 was listed at at 5300 rpm - an under-rated figure. Chevrolet wanted to keep the horsepower rating at less than 1 hp per cubic inch, for insurance premium calculations and for classification in racing.