Table 15[78] gives the relation between the time in days to decolorize methylene blue at 20° C. (_t__{ 20}) and the relative stability number or ratio of available oxygen to oxygen required for equilibrium, expressed in percentage (S).
───────────────────────────────────┬─────────────────────────────────── Time required for decolorization at│ Relative stability. 20° C. │ ───────────────────────────────────┼─────────────────────────────────── _Days._ │ _Percentage._ 0.5│ 11 1.0│ 21 1.5│ 30 2.0│ 37 2.5│ 44 3.0│ 50 4.0│ 60 5.0│ 68 6.0│ 75 7.0│ 80 8.0│ 84 9.0│ 87 10.0│ 90 11.0│ 92 12.0│ 94 13.0│ 95 14.0│ 96 16.0│ 97 18.0│ 98 20.0│ 99 ───────────────────────────────────┴───────────────────────────────────
The theoretical relation is, S = 100 (1 − 0.794_t__{ 20})
The relation between the time of reduction at 20° C. and that at 37° C. is approximately two to one, but if an observer incubates at 37° C. he should work out his own comparative 37° C. table or factor.
A relative stability of 75 signifies that the sample examined contains a supply of available oxygen equal to 75 per cent of the amount of oxygen which it requires in order to become perfectly stable. The available oxygen is approximately equivalent to the dissolved oxygen plus the available oxygen of nitrate and nitrite. Nitrite in sewage is usually so low as to be negligible.
BIOCHEMICAL OXYGEN DEMAND OF SEWAGE AND EFFLUENTS.[60a][60c][60d]
The relative stability method may be employed to obtain a measure of the putrescible material in sewages and effluents in terms of oxygen demand.
_Procedure for effluents._—Divide the total available oxygen, including the oxygen of nitrite and nitrate, by the relative stability expressed as a decimal.
_Procedure for sewages._—Make one or two dilutions with fully aerated distilled water of known dissolved oxygen content. Tap water may be employed if it is free from nitrates. Vary the relative proportions of sewage and water to be employed to give a relative stability of 50 to 75. Unless seals[1b][2b][52a] are used bring the water as well as the sewage to the temperature at which the mixtures are to be incubated before preparing the dilutions. During the manipulation avoid aeration. Having made the proper dilutions, determine the relative stability of each.